Other possible problems and their causes:
PROBLEM
The oven will not operate
Burner fails to light
Burner flames are uneven
Burner flames lift off ports, are yellow, or are noisy when turned off
Burner makes popping noise when on
Control knob(s) will not turn
The
CAUSE
l You have not set the electronic control correctly. Refer to the section in this manual describing the function you are operating.
l You have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
l The range is not plugged into a live outlet with the proper voltage. (See Installation Instructions.)
l You have blown a household fuse or tripped a circuit breaker. In case of prolonged power failure, manually light burners (see page 9).
l The burner ports are clogged. Clean with a straight pin (see pages 34 and 35).
l The burner ports are clogged. Clean with a straight pin (see pages 34 and 35). If this fails, call for service.
l The air/gas mixture is incorrect. Contact a service techni- cian to check it.
l The burner is wet from washing. Let dry.
l You are not pushing in before turning.
l The clock does not show the correct time of day.
l The Lock Lever is not all the way to the right.
l You have programmed a delayed start time. Wait for the start time to be reached.
continued on next page
39