Whirlpool RF376PXY warranty Set cleaning time from the set stop time

Page 30

If a cleaning cycle other than 3 hours is desired, use the Hour and Minute pad to set the desired cleaning time. Push the “up”(A) or udown” (r) pad(s) until a time between 2-4 shows in the display.

l

l

Use 2 hours for light soil.

Use 34 hours for moderate to heavy soil.

Push the StarVEnter pad. The Clean Time Indicator Light will stay on to show that the oven is programmed for the Setf-Cleaning cycle.

Skip to Step 6 if you want the SelfCleaning cycle to start now.

4. To delay the start using Stop Time:

Set both the Oven Selector and Oven Tem- perature Control Knob to CLEAN. Push the Stop Time pad. The Clean Time Indicator Light will flash and the Stop Time indicator Light will light up. Use the Hour and Minute pad to set the desired stop time. Push the “LIP”(A) or “down” (r) pad(s) until the correct time shows in the display. The oven will automatically compute the delay start time by subtracting the

set cleaning time from the set stop time. i-

Push the Start/Enter pad. The display will go back to showing the current time of day. The Delay indicator tight will light up and the Clean Time and Stop Time indicator Lights will flash to indicate that the oven is programmed to start the Setf-Cleaning cycle at a later time.

When the start time is reached, the Delay Indicator Light will go off, the Clean Time Indicator Light will light up (stop flashing) and the oven will start to clean.

5.To delay the start using Start Time:

Set both the Oven Selector and Oven Tem- perature Control Knob to CLEAN. Push the Delay Start Time pad. The Clean Time Indicator Light will flash and the Start Time indicator Light will light up. Use the Hour and Minute pads to set the desired start time. Push the “up”(A) or “down” (r) pad(s) until the correct time shows in the d/splay.

Push the Statinter pad. The display will go back to showing the current time of day. The Delay Indicator Light will light up and the Clean Time and Start Time Indicator Lights will

flash to indicate that the oven is programmed

to start the Self-Cleaning cycle at a later time.DELAY When the start time is reached, the Delay

Indicator Light will go off, the Clean Time Indicator Light will light up (stop flashing) and the oven will start to clean.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Tf You Cell us with questions or commentsSerial Number Your safety is important to usThank you for buying a Whirlpool appliance Purchase DateImportant Safety Instructions TiilusePage Page Indicator Control PanelBake element Hot surface indicator lights Using the surface unitsSurface heating indicator light ’ In This SectionUsing Cookware TipsPositioning racks PansHome canning information Using aluminum foil for baking For best air circulationDisplay/clock Command padsElectronic oven controls Clock setSetting the clock Control knobsPush the Start/Enter pad Using the electronic Minute Timer Using the Off/Cancel padTo cancel the Minute Timer Adjusting the oven temperature control Baking/roastingCustom broil See Broiling rack position chart onBroiling Tighten the locking screws and replace the control knobEnergy saviri’g tips Broiling rack position chartBroiling tips Type Food DonenessUsing the electronic Mealtimer control Cook TimeMethod Z-Using Stop Time Page Cook Start Time Time Delay Method Z-Using Start Time Stop Time Page Method 3-Using Cook Time Stop Time Delay Oven vent Storage drawerAnti-tip bracket Optional dosr panel patBefore you start Before you start the Self-Cleaning cycle, make sure youHow the cycle works This Section PageP%PSetting the controls Clean TimeSet cleaning time from the set stop time To stop the Self-Cleaning cycle at any time Cleaning the cooktop Special tipsThis Section What to use Cleaning tipsPersonal Injury Hazard Razor scraper-Use to remove cooked-onCleaning other range parts HOW to CleanPart What To USE Oven light Problem Before calling for assistancePossible Cause Solution DisplayFlashing F2 shows If you need assistance If you need serviceIf you are not satisfied with how the problem was solved If you need FSP’ replace- ment partsPage Full FIVE-YEAR Length Warranty WhirlpoolPAY for Full ONE-YEAR For Life Product
Top Page Image Contents