Solid Element Surface Units

3.IMPORTANT: After cleaning, apply a thin coat of salt-free oil to the CCCL surface units, then heat 3-5 minutes. Oil may smoke slightly when heated. If surface units have dark spots caused by grease and food, the oil treatment will improve

their appearance but not eliminate the spots. NOTE: Optional Elec- trol dressing can be applled to the surface unlts to Improve

their appearance.

2.For best results, wipe off surface units with a damp soft cloth and soapy water after each use. Burned- on food may be removed with a soapy scouring pad. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

4.The stainless steel trim rings will gradually yellow from the heat of the surface units and pans. This is normal. The yellowing can be removed by using stainless steel cleaner or Cook Top Polishing Creme on the trim rings.

To obtain order information for Cook Top Polishing Creme (PN 814009) or Electrol dressing (PN 814030), write to:

Whirlpool Corporation

Attention: Customer Service Dept. 1900 Whirlpool Drive

LaPorte, IN 46350s