Using the Self-Cleaning Cycle
The
Before You Start
1.Clean the shaded areas by hand. They do not get hot enough dur- ing the
l the frame around the oven.
l the inside of the door, especially the part outside the oven seal.
DO NOT clean the fiberglass seal. DO NOT move it or bend it. Poor cleaning and poor baking will result.
2.Remove the broiler pan and any pots or pans you may have stored in the oven. They can’t stand the high heat.
3.Wipe out any loose soil or grease. This will help reduce smoke dur-
ingthecleaning cycle.
4.If your oven has a rotisserie, make sure the motor socket cover is closed.
5.Put oven racks on the second
and fourth guides. During the Self- Cleaning Cycle they will darken and become harder to slide. See tips on page 18. If you want the oven racks to remain shiny, clean them by hand.
Clean Frame
Turn on the vent hood or other kitchen vent during the cleaning cycle.
This will help remove smoke, odor and heat that are normal during the cycle.
DO NOT use commercial oven cleaners in your oven. Damage to the porcelain finish may occur,
DO NOT force the Lock Lever, you could bend or break it. The lever is designed to stay locked until the oven is cool enough to safely open. Wait until it moves freely.
DO NOT use foil or other liners in the oven. During the cleaning cycle foil can burn or melt and damage the
16