Replacing the storage drawer:
1. Fit ends of drawer slide rails into the drawer guides on both sides of opening.
2. Lift drawer front and push in until metal
stops on drawer slide rails clear white stops on drawer guides. Lift drawer front again to clear second stop and slide
drawer closed.
Drawer slide rail
The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the
arll |
|
| Personal | Injury | Hazard |
| ||
. |
|
|
| |||||
0 | @4.To reduce risk of range tipping over, secure range with a properly | |||||||
|
| installed | range or an optional | wall- | ||||
I&!!! | mounted |
|
|
| ||||
If range is moved | for cleaning | or service, check that | bracket | |||||
0 | t | l | ||||||
| is engaged before | using range. |
|
| ||||
|
|
|
|
Failure to follow the above precautions could result in personal injury.
To verify the
is engaged (if you have a floor bracket):
l Remove the storage drawer. (See page 19.) l Look to see if the
attached to floor with screws.
l Make sure one rear leveling leg is positioned under the
l See Installation Instructions for further details.
To verify the
l Look to see if the
l Make sure the cable on the back of the range is secured by the two hooks on the bracket.
l Cable must be unhooked from wall bracket to move range for cleaning or service. Reconnect cable before using range.
l See Installation Instructions for further details.
Rear leveling hl
Floor bracket
Cable (attached to rear of control panel)
Wall bracket
20