Whirlpool FEP320G, FES330G, FEP310G Locking screws, To lower Notches, Skirt To raise Tooth

Page 19

USING YOUR RANGE

ADJUSTING THE OVEN TEMPERATURE CONTROL (MODELS FEP310G, FEP320G, FEP330G)

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If you are not satisfied with the baking/roasting results, you can change the temperature calibration by following the steps below.

NOTE: DO NOT measure the oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect reading. Also, the thermometer temperature reading will change as your oven cycles.

1.Make sure the oven temperature control knob is turned to the off position. Pull the knob straight off and flip it over.

2.Loosen the locking screws inside the control knob.

Note the position of the notches.

Locking screws

F
O	F		B
			R
			O
				I
				L
					5
0					0
0					0
5
1					4
0					4
0					5
0					0
2					4
0				0	4
0				0
5			0
2		3
0		3
0	5
03	0
	OTCH :			5˚F						Notches
	OTCH :
1 N
						L
						O
						O
						S
								E
								N
										S
COOLER				HOTTER						C
COOLER				HOTTER						S
										R
										E
										W
										A
										N
										D
							A	T	O	R
						T		T


						E

3.Adjust the temperature.

•To lower the temperature, hold the knob handle firmly and turn the skirt counterclock- wise to move the tooth a notch to the left.

•To raise the temperature, hold the knob handle firmly and turn the skirt clockwise to move the tooth a notch to the right.

Each notch equals about 5°F.

To lower

Notches

	TCH :	5˚
1	NO	5˚	F
1			F
				L
				O
				O
					S
						E
						N
								S
								C
COOLER		HOTTER							R
COOLER		HOTTER							E
									W
									S
									A
									N
							O	R	D
						T		R
					A


				T
				E

Skirt

To raise

Tooth

4.Tighten the locking screws and replace the control knob.

Locking screws

	TCH :	5˚
1	NO	5˚	F
1			F
				L
				O
				O
					S
						E
						N
								S
								C
COOLER		HOTTER							R
COOLER		HOTTER							E
									W
									S
									A
									N
							O	R	D
						T		R
					A


				T
				E

0 5 1

0 0

2

0 5 2

OFF
	B
	R
	O
	I
	L
		5
		0
		0
		4
		5
		0
	0	4
	0
	0
003	3
003	05

19

Image 19

Contents Standard-Cleaning Please record your modelÕs information Thank you for buying a Roper applianceOn next Range SafetyImportant Safety Instructions For units with ventilating hood For self-cleaning rangesControl Panel Parts and FeaturesRemovable storage drawer p Electronic clock/timerParts and Features Coil element heat settings Using Your RangeUsing the Coil Elements Using the control knobsOptional canning kit Home canning informationCookware tips Characteristics of Cookware Materials Positioning racks and pans Rack placement for specific foodsWhere to place pans When YOU have PlaceElectronic display Clock pad p Using Aluminum FoilOven timer pad Increase pad Decrease pad Display/clockSetting the Clock Models FEP33OG and FES33OG Time of day To cancel the timerBaking/roasting temperature you want Display counts in secondsSaving energy BAKING/ROASTING Models FEP31OG, FEP32OG, FEP33OG Roasting meats and poultryTo Cook Food Fahrenheit Adjust byThis Number DegreesSkirt To raise Tooth Locking screwsNotches To lower NotchesBroiling Model FES330G Oven on and Heating lights go on Set the oven control knob to BroilAfter broiling, turn the oven control Knob to OFFBroiling Models FEP310G, FEP320G, FEP330G After broiling, turn off the oven To broil at a lower temperatureSet the oven selector and the oven temperature Control knob to Broil Oven on indicator light will come onApproximate Time Broiling guidelinesRack Minutes Meat Position Side ANTI-TIP Bracket Oven VentLower slide rail inside drawer Opening Upper drawer guides Storage DrawerRemoving the storage drawer Replacing the storage drawerBefore YOU Start Before you start the Self-Cleaning cycle, make sure youTips Oven on light goes out and time of day appears in display Setting the Controls Model FES330GHOW the Cycle Works Model FES330G Caring for Your Range Cleaning ChartCaring for Your Range Replacing RemovingCoil Elements and Reflector Bowls LIFT-UP CooktopTo remove Removing the Oven DoorTo replace Surface Door stop Range Clip Door removal Hinge Hanger Pin holeFront frame AngularProblem Cause TroubleshootingRange does not Work Cooking Results Problem SolutionOur consultants provide assistance with If YOU Need Assistance or ServiceIf YOU Need Replacement Parts For Further AssistanceTopic IndexWE will not PAY for Length of Warranty WE will PAY for Full ONE-YEARWarranty From Date of Purchase