Whirlpool FEP330G, FES330G, FEP310G Adjust by, This Number, Degrees, To Cook Food Fahrenheit

Page 18

USING YOUR RANGE

ADJUSTING THE OVEN TEMPERATURE CONTROL (MODEL FES330G)

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If you are not satisfied with the baking/roasting results, you can change the offset temperature by following the steps below.

NOTE: DO NOT measure oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect reading. Also, the thermometer temperature reading will change as your oven cycles.

1. Press and hold CLOCK for 5 seconds.	PRESS	YOU SEE
The display will show the time of day. Then you
will see the current offset temperature, for
example “00,” if you have not already adjusted
the temperature.
		(factory setting of “0”)

2. Set the new offset temperature.	PRESS	YOU SEE
Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature		(example when making
setting. The minus sign shows the oven will be		oven 10°F cooler)
cooler by the displayed amount. There is no sign
in front of the number when increasing the
temperature setting.

3. Press CLOCK to enter the offset temperature.	PRESS	YOU SEE
		(time of day or minute
		timer countdown)

How to determine the amount of adjustment needed

The chart at the right tells you how much to adjust the offset temperature to get the cooking results you want. You can figure out cooking results by the amount of browning, moistness, and rising times for baked foods.

	ADJUST BY
	THIS NUMBER
	OF DEGREES
TO COOK FOOD ...	(FAHRENHEIT)

A little more	+10
Moderately more	+20
Much more	+30
A little less	-10
Moderately less	-20
Much less	-30

18

Image 18

Contents Standard-Cleaning Thank you for buying a Roper appliance Please record your modelÕs informationRange Safety On nextImportant Safety Instructions For self-cleaning ranges For units with ventilating hoodParts and Features Control PanelElectronic clock/timer Removable storage drawer pParts and Features Using the control knobs Using Your RangeUsing the Coil Elements Coil element heat settingsHome canning information Optional canning kitCookware tips Characteristics of Cookware Materials When YOU have Place Rack placement for specific foodsWhere to place pans Positioning racks and pansDisplay/clock Using Aluminum FoilOven timer pad Increase pad Decrease pad Electronic display Clock pad pSetting the Clock Models FEP33OG and FES33OG Display counts in seconds To cancel the timerBaking/roasting temperature you want Time of daySaving energy Roasting meats and poultry BAKING/ROASTING Models FEP31OG, FEP32OG, FEP33OGDegrees Adjust byThis Number To Cook Food FahrenheitTo lower Notches Locking screwsNotches Skirt To raise ToothBroiling Model FES330G Knob to OFF Set the oven control knob to BroilAfter broiling, turn the oven control Oven on and Heating lights go onBroiling Models FEP310G, FEP320G, FEP330G Control knob to Broil Oven on indicator light will come on To broil at a lower temperatureSet the oven selector and the oven temperature After broiling, turn off the ovenBroiling guidelines Approximate TimeRack Minutes Meat Position Side Oven Vent ANTI-TIP BracketReplacing the storage drawer Storage DrawerRemoving the storage drawer Lower slide rail inside drawer Opening Upper drawer guidesBefore you start the Self-Cleaning cycle, make sure you Before YOU StartTips Setting the Controls Model FES330G Oven on light goes out and time of day appears in displayHOW the Cycle Works Model FES330G Cleaning Chart Caring for Your RangeCaring for Your Range Removing ReplacingLIFT-UP Cooktop Coil Elements and Reflector BowlsRemoving the Oven Door To removeTo replace Angular Door stop Range Clip Door removal Hinge Hanger Pin holeFront frame SurfaceTroubleshooting Problem CauseRange does not Work Problem Solution Cooking ResultsFor Further Assistance If YOU Need Assistance or ServiceIf YOU Need Replacement Parts Our consultants provide assistance withIndex TopicFrom Date of Purchase Length of Warranty WE will PAY for Full ONE-YEARWarranty WE will not PAY for