Importing ringers

You can download additional ringers to your phone using the Kyocera Mobile PhoneTools software, if available (sold separately). To purchase this software and other accessories, visit www.kyocera-wireless.com/store.

Setting sounds for your phone

You can set your phone to sound tones when you open and close the flip and when you turn the phone on and off. Sounds will not occur during an incoming call, if you are on a call, or if a headset or car kit is attached to your phone.

Set sound when flip opens

1.Select Menu Settings Sounds Flip Open.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when flip closes

1.Select Menu Settings Sounds Flip Closed.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when phone powers on or off

Select Menu Settings Sounds Pwr On/Off Sound Enabled.

– To deselect this sound, select Disabled.

Adjusting volume

You can adjust the earpiece, speakerphone, and ringer volume as well as key tones.

Adjusting the earpiece volume

To adjust the earpiece volume manually during a

call, press the key up or down. To set the earpiece volume:

1.Select Menu Settings Sounds Earpiece Volume.

2.Press right to increase the volume or left

to decrease the volume and select Save.

Using smart sound

You can set a baseline volume that the phone uses to automatically adjust the earpiece volume when there is a change in the amount of noise around you or the caller’s voice.

Select Menu Settings Sounds Smart Sound Enabled.

Adjusting the ringer volume

1.Select Menu Settings Sounds Ringer Volume.

2.Press right to increase the volume or left

to decrease the volume and select Save.

Adjusting speakerphone volume

1.Select Menu Settings Sounds Spkrphone Volume.

30

Setting sounds for your phone

Page 38
Image 38
Kyocera K132 manual Setting sounds for your phone, Adjusting volume