Aiwa CX-NA31 manual Setting the Clock, Press the Clock button while pressing, Pre~aration

SETTING THE CLOCK SETTING THE TIMER

—. 4U

1 Press the CLOCK button while pressing the

SHIFT button on the remote control, and press

the II SET button within 4 seconds.

2

3

To display the current time

Press the CLOCK button while pressing the SHIFT button on the remote control. The time is displayed for 4 seconds. However, the time cannot be displayed during recording.

To switch to the 24-hour standard

Press the CLOCK button while ~ressina the SHIFT button on

If power is interrupted for more than approximately 24 hours, all settings stored in memory after purchase need to be reset.

2,4

6

The unit can be turned on at a specified time every day with the

built-in timer.

Pre~aration

If you press the II SET button after 4 seconds, another

operation may start.

2 Designate the hour of the timer-on time by

pressing the < DOWN or ➤P UP button, and press the II SET button. Repeat to designate the minute of the timer-on time.

3 Within 4 seconds, press the FUNCTION button repeatedly to select a source.

The selected source name flashes for 4 seconds.

●If this step is not completed within 4 seconds, repeat from step 1.

●If the TUNER button is pressed, the band cannot be selected in this step.

4 Within 4 seconds, select the duration for the

timer-activated period with the +4 DOWN or ~ UP button.

19 ENGLISH