Cornelius CCM CCU manual General Maintenance Procedure, Page

Page 21
General Maintenance

General Maintenance

Electrical shock and/or injury from moving parts inside this machine can cause serious injury. Disconnect electrical supply to machine prior to performing any adjustments or repairs.

Failure to perform the required maintenance at the frequency specified will void warranty coverage in the event of a related failure.

General Maintenance Procedure

To insure economical, trouble free operation of your machine, it is recommended that the following maintenance be performed every 6 months.

1.Clean the ice-making section per the instructions below. Cleaning should be performed a minimum of every 6 months. Local water conditions may require that cleaning be performed more often.

2.Check ice bridge thickness. See page 14 for proper thickness and adjustment procedure.

3.Check water level in trough. See page 14 for proper water level and adjustment.

4.Clean the condenser (air-cooled machines) to insure unobstructed air flow.

5.Check for leaks of any kind: Water, Refrigerant, Oil, Etc.

6.Check the bin control switch for proper adjustment. See page 15 for bin switch adjustment.

7.Check the water valve (water-cooled machines) for proper adjustment by measuring the water temperature at the outlet of the condenser. It should be between 100°F and 110°F. (38°C and 43°C)

8.Check all electrical connections.

9.Oil the fan motor if the motor has an oil fitting. (Self contained air-cooled models only)

10.Check the water filter (if applicable) and replace if dirty or restricted.

11.Inspect the evaporator water distribution tube to insure even distribution of water across the face of the evaporator.

Page 16

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Revision A Publication Number Revision Date SeptemberInstallation, Start-upand Maintenance Manual Nordic Ice MakerPage Forward How To Use This ManualKeep this manual for future reference PageFreight Claim Procedure Table of ContentsInstallation Guidelines Start-UpProcedureFreight Claims Important Inspect Promptly Freight Claim ProcedureVisible Loss or Damage Concealed Loss or DamageSample Data Plate Model and Serial Number FormatModel Number Serial NumberElectrical Specifications Installation Guidelines Installation GuidelinesAdjustments Ambient Operating TemperaturesAttach the ice machine to the bin or Installation Guidelinesdispenser with the provided PageAir Flow Remote Condenser InstallationRemote Condenser Guidelines Installation GuidelinesPage Remote Condenser GuidelinesRemove the grill screws to access the control box ON-OFF-WASHSwitch is located in the control boxElectrical and Plumbing Requirements PageRemove the grill screws to access the control box ON-OFF-WASHSwitch is located in the control boxElectrical and Plumbing Requirements PageElectrical and Plumbing Requirements Includes 50Hz. UnitsPage Includes 50Hz. And 3 Phase Units Electrical and Plumbing RequirementsPage Includes 50Hz. and 3 Phase Units Electrical and Plumbing RequirementsPage Page Electrical and Plumbing RequirementsPage Electrical and Plumbing RequirementsHow the CCM Ice Machine Works How the Ice Machine WorksPage Start-UpProcedure Start-UpProcedure Bridge Thickness and Timer AdjustmentPage Bin Control Adjustment Start-UpProcedure Bin Control OperationUndercounter Models PageGeneral Maintenance General Maintenance ProcedurePage Cleaning Procedure Ice Machine Cleaning and Sanitizing InstructionsPage Cleaning Activity Cabinet Care Cleaning stainless steelCleaning Agent Method of ApplicationPage Winterizing Procedure Winterizing ProceduresService History Service HistoryPage
Top Page Image Contents