Cornelius Ice Cooled Dispensers manual Produces Foam AS IT, Leaves Dispensing Valve

Page 8

Trouble

Probable Cause

Remedy

DISPENSED PRODUCT

A. Dispensing valve restricted

A. Sanitize syrup system as

PRODUCES FOAM AS IT

or dirty.

instructed.

LEAVES DISPENSING VALVE

 

 

B.Tapered nylon washer inside carbonated water line swivel nut connector distorted restricting carbonated water flow.

B.Replace nylon washer. Make sure it is properly seated.

C. Dirty water supply.

C. Check water filter. Replace

 

cartridge. (see NOTE)

D.Warm Product - No ice in bin, bridged ice on cold plate or plugged drain.

D.Replenish ice, break ice up to eliminate bridging, unplug the drain.

NOTE: If water supply is dirty, be sure to flush lines and carbonator completely. It may be necessary to remove lines to carbonator tank, invert tank, and flush tank and all inlet lines to remove any foreign particles or dirt.

NO PRODUCT DISPENSED

A. Transformer unplugged.

A. Plug in the transformer.

FROM ALL DISPENSING

 

 

VALVES

 

 

B.No electrical power to transformer.

B.Check fuse or circuit breaker.

 

C.

Disconnected dispensing

C.

Connect dispensing valves

 

 

valves power cord.

 

power cord.

 

D.

Disconnected or broken wiring

D.

Connect or replace wiring.

 

 

to dispensing valves.

 

 

 

E.

Inoperative transformer.

E.

Replace transformer as

 

 

 

 

instructed.

 

 

 

 

 

NO PRODUCT DISPENSED

A.

Broken or disconnected wiring.

A.

Repair or connect wiring.

FROM ONE DISPENSING

 

 

 

 

VALVE

 

 

 

 

 

B.

Inoperative dispensing valve

B.

Replace solenoid coil as

 

 

solenoid coil.

 

instructed.

 

C.

Inoperative dispensing valve

C.

Replace micro switch as

 

 

micro switch.

 

instructed.

 

 

 

 

 

EIMI Cornelius Inc; 1994–2003

8

Rev 10/8/03

166239002

 

 

Rev. Level 1

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Recommended Maintenance Details of Maintenance TasksClean All Exterior Surfaces Operators Manual ICE Cooled DispensersClean Dispensing Valves, Post-Mix Clean Dispensing Valves, Pre-MixSanitize Tank Systems, Post-Mix and Pre-Mix Sanitize Syrup Lines, B-I-B SystemsCO2 Settings Regulator Pressure SettingPost-Mix Pre-MixDrink Dispenser Valves TOO LOW or TOO High TroubleshootingWATER-TO-SYRUP ‘‘RATIO’’ Dispensed Product Carbonation TOO LOWComes OUT Dispensing Valve Clear But Foams in CUP or GlassProduces Foam AS IT Leaves Dispensing ValveNo Product Dispensed From ALL Dispensing ValvesOnly Syrup Dispensed Only Carbonated Water aDispensed Warranty

Ice Cooled Dispensers specifications

Cornelius Ice Cooled Dispensers are a cornerstone in the beverage service industry, offering a reliable and efficient way to dispense a variety of drinks while maintaining optimal temperature and quality. These dispensers leverage innovative technologies and design features that enhance both functionality and user experience.

One of the standout features of Cornelius Ice Cooled Dispensers is their unique refrigeration system. This system utilizes a combination of ice and chilled air to maintain beverage temperatures where they need to be. The ice reservoir allows the drinks to stay cold, ensuring that every pour is refreshing and tasty. The advanced cooling engineering minimizes energy consumption while maximizing cooling efficiency, making these dispensers an environmentally conscious choice.

Another key characteristic of these dispensers is their ability to dispense a wide range of beverages, from carbonated drinks and iced teas to juices and flavored waters. The flexibility to handle various beverage types makes them suitable for diverse settings, including restaurants, convenience stores, and sporting venues. The straightforward interface and customizable beverage options allow operators to tailor their offerings, maximizing customer satisfaction.

Additionally, Cornelius Ice Cooled Dispensers come equipped with user-friendly features. The easy-to-read display and intuitive controls enable quick adjustments and on-the-fly changes to beverage mixes. Maintenance is simplified, too. The removable components, such as the ice bin and drip tray, allow for hassle-free cleaning and service, which is crucial in busy environments.

Moreover, the construction and design of the dispensers reflect a commitment to durability and performance. With robust materials and an ergonomic design, Cornelius dispensers are built to withstand the rigors of daily use. Their aesthetic appeal also makes them a fitting addition to any beverage service area, blending seamlessly with the surrounding décor.

In summary, Cornelius Ice Cooled Dispensers combine cutting-edge technology, user-friendly features, and a robust design to deliver an exceptional beverage-dispensing experience. Their refrigeration capabilities, flexibility in beverage options, ease of maintenance, and attractive design make them an invaluable asset for any establishment focusing on quality service and customer satisfaction. With these dispensers, operators can confidently offer consistently cold and delicious drinks that keep patrons coming back for more.
Top Page Image Contents