Aiwa XR-M55 operating instructions Setting the Sleep Timer, To switch to the 24-hour standard

Page 26

With power on, press DISPLAY once on the remote control. The time is displayed for 4 seconds. However, the time cannot be displayed during recording.

When the power is off, press DEMO/ECO repeatedly until the display changes to clock or press once (the time is displayed for 4 seconds).

To switch to the 24-hour standard

With power on, press DISPLAY then press within 4 seconds. Repeat the same procedure to restore the 12-hour standard.

If the clock display flashes

This is caused by a power interruption. The current time needs to be reset.

If power is interrupted for more than approximately 24 hours, all settings stored in memory after purchase need to be reset.

NOTE

After finish setting the clock, the unit will switch to ECO mode.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.

1 Press SLEEP.

2 Within 3 seconds, press or to specify the time until the power is turned off.

The time changes between 5 and 240 minutes in 5-minute steps.

• MULTI JOG is also available instead of and .

Image 26

Contents Aiwa Call toll free 1-800-BUY-AIWAElectric Power PrecautionsInstallation AC power cordPrecautions cont pg Table of ContentsPreparations pg Check your system accessoriesBefore connecting the AC cord ConnectionsConnect the left speaker to the main unit Preparations cont pgConnect the right speaker to the main unit Connect the supplied antennasTo position the antennas FM feeder antenna AM loop antennaConnecting AN Outdoor Antenna Remote ControlTo cancel Demonstration mode To turn the power offDemo Demonstration mode Before OperationPress DEMO/ECO Setting ECO Power Economizing ModeUsing the headphones To change the brightness of the displaySound pg Audio AdjustmentsVolume Super T-BASS SystemGraphic Equalizer To cancel the selected modeTo select with the remote control Manual Tuning Radio Reception pgSelecting a preset number on the main unit Presetting StationsPreset Number Tuning Repeat steps 1Loading Disc CD Playing pgBasic Operations Playing DiscCD Playing RANDOM/REPEAT PlayProgrammed Play Tape Playback pg Playing Back a Tape To select a reverse modeInserting a Tape Insert a tape. Then press to start playTo fast forward or rewind, press Recording pgTo change the playback side, press To set the tape counter toPreparation Press TAPE/REV Mode to select the reverse modeBasic Recording Insert the tape to be recorded on into deckInserting Blank Space Sound adjustment during recordingRecording contpg AI Edit RecordingTo stop recording Insert the tape into deckPress numbered buttons 0-9 to designate the tape length To clear the edit programProgrammed Edit Recording Time on cassette tapes and editing timeAfter confirming B on the display, repeat step To change the program of each side Clock and Timer pgSetting the Clock Press To designate the time, then pressIf the clock display flashes Setting the Sleep TimerTo switch to the 24-hour standard To check the time remaining until the power is turned off Clock and Timer cont. pgSetting the Timer To cancel the sleep timerTimer Recording MD Jacks Connecting Optional EquipmentVIDEO/AUX Jacks Line OUT JacksListening to External Sources Care and MaintenanceGeneral pg Care of discs Troubleshooting GuideTo demagnetize the heads Care of tapesSpecifications General cont pgAmplifier section FM tuner sectionAM tuner section Cassette deck sectionGeneral cont. pg Parts Index