Aiwa XR-M55 operating instructions Connecting AN Outdoor Antenna, Remote Control

Page 7

• Do not unwind the AM antenna wire.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is recommended.

Connect the outdoor antenna to FM 75 Ω terminals.

To connect other optional equipment --> page 17

PREPARATIONS (cont) pg. 5

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two size AA (R6) batteries.

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPE, TUNER, VIDEO/AUX, CD, MD) on the main unit. Each time FUNCTION is pressed while power is on, the next function is selected cyclically.

PLAY on the remote control

Image 7

Contents Call toll free 1-800-BUY-AIWA AiwaAC power cord PrecautionsInstallation Electric PowerTable of Contents Precautions cont pgConnections Check your system accessoriesBefore connecting the AC cord Preparations pgConnect the supplied antennas Preparations cont pgConnect the right speaker to the main unit Connect the left speaker to the main unitAM loop antenna To position the antennas FM feeder antennaRemote Control Connecting AN Outdoor AntennaBefore Operation To turn the power offDemo Demonstration mode To cancel Demonstration modeTo change the brightness of the display Setting ECO Power Economizing ModeUsing the headphones Press DEMO/ECOSuper T-BASS System Audio AdjustmentsVolume Sound pgTo select with the remote control To cancel the selected modeGraphic Equalizer Radio Reception pg Manual TuningRepeat steps 1 Presetting StationsPreset Number Tuning Selecting a preset number on the main unitPlaying Disc CD Playing pgBasic Operations Loading DiscRANDOM/REPEAT Play CD PlayingProgrammed Play Tape Playback pg Insert a tape. Then press to start play To select a reverse modeInserting a Tape Playing Back a TapeTo set the tape counter to Recording pgTo change the playback side, press To fast forward or rewind, pressInsert the tape to be recorded on into deck Press TAPE/REV Mode to select the reverse modeBasic Recording PreparationAI Edit Recording Sound adjustment during recordingRecording contpg Inserting Blank SpaceTo clear the edit program Insert the tape into deckPress numbered buttons 0-9 to designate the tape length To stop recordingTime on cassette tapes and editing time Programmed Edit RecordingAfter confirming B on the display, repeat step Press To designate the time, then press Clock and Timer pgSetting the Clock To change the program of each sideTo switch to the 24-hour standard Setting the Sleep TimerIf the clock display flashes To cancel the sleep timer Clock and Timer cont. pgSetting the Timer To check the time remaining until the power is turned offTimer Recording Line OUT Jacks Connecting Optional EquipmentVIDEO/AUX Jacks MD JacksGeneral pg Care and MaintenanceListening to External Sources Care of tapes Troubleshooting GuideTo demagnetize the heads Care of discsGeneral cont pg SpecificationsCassette deck section FM tuner sectionAM tuner section Amplifier sectionParts Index General cont. pg