Aiwa XR-M55 Programmed Edit Recording, Time on cassette tapes and editing time

Page 23

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape's specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark).

•Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

•The AI edit function cannot be used with discs containing 31 tracks or more.

RECORDING (cont)pg. 14

PROGRAMMED EDIT RECORDING

In the programmed edit recording function, the track can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.

Use the remote control from step 2 to 7.

1 Insert the tape into deck.

Insert the tape with the side to be recorded on first facing out from the unit.

2 Press FUNCTION repeatedly until "CD" is displayed and load the disc.

3 Press MODE repeatedly until "PRGM EDIT" appears on the display.

"EDIT" lights up and "PRGM" flashes on the display.

Image 23

Contents Call toll free 1-800-BUY-AIWA AiwaAC power cord PrecautionsInstallation Electric PowerTable of Contents Precautions cont pgConnections Check your system accessoriesBefore connecting the AC cord Preparations pgConnect the supplied antennas Preparations cont pgConnect the right speaker to the main unit Connect the left speaker to the main unitAM loop antenna To position the antennas FM feeder antennaRemote Control Connecting AN Outdoor AntennaBefore Operation To turn the power offDemo Demonstration mode To cancel Demonstration modeTo change the brightness of the display Setting ECO Power Economizing ModeUsing the headphones Press DEMO/ECOSuper T-BASS System Audio AdjustmentsVolume Sound pgGraphic Equalizer To cancel the selected modeTo select with the remote control Radio Reception pg Manual TuningRepeat steps 1 Presetting StationsPreset Number Tuning Selecting a preset number on the main unitPlaying Disc CD Playing pgBasic Operations Loading DiscRANDOM/REPEAT Play CD PlayingProgrammed Play Tape Playback pg Insert a tape. Then press to start play To select a reverse modeInserting a Tape Playing Back a TapeTo set the tape counter to Recording pgTo change the playback side, press To fast forward or rewind, pressInsert the tape to be recorded on into deck Press TAPE/REV Mode to select the reverse modeBasic Recording PreparationAI Edit Recording Sound adjustment during recordingRecording contpg Inserting Blank SpaceTo clear the edit program Insert the tape into deckPress numbered buttons 0-9 to designate the tape length To stop recordingTime on cassette tapes and editing time Programmed Edit RecordingAfter confirming B on the display, repeat step Press To designate the time, then press Clock and Timer pgSetting the Clock To change the program of each sideIf the clock display flashes Setting the Sleep TimerTo switch to the 24-hour standard To cancel the sleep timer Clock and Timer cont. pgSetting the Timer To check the time remaining until the power is turned offTimer Recording Line OUT Jacks Connecting Optional EquipmentVIDEO/AUX Jacks MD JacksListening to External Sources Care and MaintenanceGeneral pg Care of tapes Troubleshooting GuideTo demagnetize the heads Care of discsGeneral cont pg SpecificationsCassette deck section FM tuner sectionAM tuner section Amplifier sectionParts Index General cont. pg