Gaggenau VC 422-610 manual Operating for the first time, About use

Page 8

Operating for the first time

Remove the packaging from the appliance and dispose of it according to local regulations. Be careful to remove all accessories from the packaging. Keep packaging elements and plastic bags away from children.

Check the appliance for transport damage before installing it.

The appliance must be installed and connected by an authorised specialist before operation. Before operating the appliance for the first time, make sure that the mains connection is in proper working order.

The serial number of the appliance can be found on the quality control slip which is included with these instructions. This quality control slip should be kept, for guarantee reasons, together with your operating and assembly instructions.

Read through these instructions attentively before operating your appliance for the first time.

Thoroughly clean the appliance and accessories before using them for the first time. This will eliminate any 'newness’ smells and soiling (see chapter “Cleaning and care”).

About use

The appliance is intended solely for household use and must not be put to any other uses.

Use the appliance to prepare meals only. Do not use the appliance to heat up the room in which it is installed.

Do not use the cooking surface to store items.

Place a cooking vessel on the corresponding cooking zone before operating it. Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should correspond to the size of the hotplate. This will save you energy and time.

Switch off the hob after use.

Iridiscent discoloration can be caused by the bases of some pots. These do not interfere with the operation of the glass ceramic hob.

Always keep the cooking area dry and clean. The surface can be scratched due to dirt (e.g. sand grains).

Never heat food in aluminium or plastic containers as the material can melt and damage your hob.

Built-in overheating protection prevents overheating of the appliance and of surrounding kitchen furni- ture.

In the event of malfunction, first check your household fuses. If the power supply is in proper working order, but the appliance is still not functioning, please inform your specialist dealer or your nearest Gaggenau after-sales service.

6

Image 8
Contents Page Page Page Page Important safeguards Read All Instructions Page For your safety Important NotesOperating for the first time About useFeatures Features Special accessoriesVisual signals Operation Holiday safeguard Automatic switch-off Energy Saving Tips Settings Table Settings TableCleaning and Care Maintenance Important notes on installation InstallationTechnical Data Electrical connection Page Preparing the cabinet Installing the control panel Installing the cooktop Page Gaggenau Hausgeräte Gmbh