Eurocave 50, 25 installation instructions II- Drilling the wall, III- Fitting

Page 10

7 - INSTALLING THE CONDITIONER

•Fitting: (see C diagrams)

The conditioner comes supplied with a metallic mounting frame which simpli￿es the process of drilling air entry and exit holes.

It also has extendable ducting to be cut to length (75 cm each) in order to install the conditioner whatever the thickness of the wall.

Finally, the conditioner is supplied with an aesthetic front panel and 4 grids for an aesthetic appearance.

 

Grid

Extendable

Aesthetic

ducting

front panel

Wall drill

 

holes

 

Metallic mounting frame

Conditioner housed outside the cellar

Diagram C

Extendable ducting

Metallic

mounting

frame

Grid

Aesthetic front panel

Wall drill holes

Conditioner housed inside the cellar

Diagram C

II- Drilling the wall

-Determine the location of the conditioner housing (inside or outside the cellar)

-Position the metallic mounting frame:(1)

•in relation to the ceiling if ￿tting the conditioner at a height (maintain a distance of 200 mm between the top of the frame and the ceiling),

•in relation to the ￿oor for a low ￿tting (maintain a distance of 80 mm between the bottom of the frame and the ￿oor).

-Use the metallic frame to outline the position of the 2 drill holes (2).

-Drill the wall.The holes must be larger than the outline drawn – between 210 mm min. and 280 mm max.

(1)

III- Fitting

(2)

-Fold the ring’s 4 supports inwards (1).

-Fit the 2 extendable ducts onto the rings of the metallic frame(2).

-Screw the securing rings onto the ducts(3).

-Position the metallic frame while passing the ￿exible ducts through the 2 holes drilled into the wall(4).

-Push back the 4 supports towards the outside of the ring(5).

(1)

(2)

(3)

(4)

(5)

-Screw the metallic frame onto the wall with 2 high screws and two low screws (not supplied).Use screws suitable for the wallmaterial (6).

-We recommend that you put a bead of silicone between the plate and the wall to ensure e￿ective sealing.

-Pull the 2 ducts (￿xed to the metallic frame) through the other side of the wall(7).

-Stretch the ducts to the maximum in order to make them as smooth as possible(8).

-Cut the ducts ￿ush with the wall using a Stanley knife for the material(9) and pliers for the metallic wiring(10).

(6)

(7)

(8)

(9)

(10)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents March Contents Servic E DU VIN AU Verre Usual wine serving temperatures Welcome to the World of EurocaveConditioner Description HOT AIRElectrical Power Supply Technical Specifications Insulate yes but how? Insulation boards dierent methods of tting are possibleInstalling the Conditioner General pointsII- Drilling the wall III- FittingPage Conditioner with air extraction via piping Fitting onto a doorFitting close to the floor Conditioner housed outside the cellarIV- Discharging condensate Conditioner housed inside the cellarConditioner Operation Remote control description Installing the Remote ControlII- Installing the remote control inside the cellar III- Installing the remote control outside the cellar Connecting the sensor to the remote controlProgramming the remote control FittingIII- Remote control description II- Switching onOnnection IV- Installing the remote control Setting the temperatureVII- Heating function VIII- C hanging the remote control batteriesVI- Silent function IX Discharging condensateMaintenance Operating Faults12 GB Around Wine

25, 50 specifications

The Eurocave 50,25 is a premium wine cellar designed for both wine enthusiasts and collectors, providing an optimal storage solution to preserve and enhance the quality of fine wines. With a sleek and stylish design, this model not only serves a functional purpose but also adds a touch of elegance to any interior space.

One of the standout features of the Eurocave 50,25 is its capacity. It can accommodate up to 50 bottles, making it suitable for both moderate and larger collections. The cellar is designed to store your bottles horizontally, ensuring that the corks remain moist and preventing oxidation. This thoughtful design helps maintain the wine's integrity over time, ensuring that each bottle is ready to be enjoyed when the time comes.

The Eurocave 50,25 is equipped with advanced temperature control technology, allowing users to set and maintain the perfect storage conditions for their wines. With a temperature range of 5 to 20 degrees Celsius, this wine cellar is highly versatile, catering to the needs of different wine types, including reds, whites, and sparkling wines. The cellar features precise electronic controls that ensure consistent temperatures, eliminating the risk of detrimental fluctuations.

Moreover, the Eurocave 50,25 employs a dual-zone cooling system, which enables the separation of storage environments within the cellar. This feature allows wine enthusiasts to store various types of wines at their ideal temperatures simultaneously, catering to a diverse collection.

Another significant characteristic of the Eurocave 50,25 is its humidity control technology. Maintaining optimal humidity levels is crucial to prevent cork deterioration and evaporation of wine. This wine cellar features a built-in humidification system, ensuring a stable level of humidity around 50-80%, which is ideal for wine storage.

In addition to its functional features, the Eurocave 50,25 is designed with aesthetic appeal in mind. The unit comes with a sleek, contemporary design and soft interior lighting, allowing users to display their wine collection attractively. The insulated glass door provides visibility while protecting the bottles from harmful UV rays.

Overall, the Eurocave 50,25 combines state-of-the-art technologies with an elegant design, making it an ideal choice for serious wine collectors and casual enthusiasts alike, who value quality storage and display solutions for their prized wine selections.
Top Page Image Contents