Eurocave 25, 50 IV- Discharging condensate, Conditioner housed inside the cellar

Page 13

7 - INSTALLING THE CONDITIONER

Conditioner housed inside the cellar:

There are 2 methods for attaching the hot air extraction piping:

-Attaching the piping directly to the aesthetic front panel:

-Position and screw, using a Hex wrench (supplied), the two supplied ￿anges* onto the aesthetic front panel(1).

-Fit together the reducer (2).

-Position the air extraction piping (standard piping, 160 mm in diameter, not supplied)(3).

(1)

(2)

(3)

- Attaching the piping directly to the conditioner housing (the extraction piping passes through the wall):

If using this method, you must not use the ￿exible ducting supplied with the conditioner.

-Fit the reducer* directly onto the mounting frame through the wall(1).

-Position the air extraction piping (standard piping, 160 mm in diameter, not supplied)(2) (3).

(1)

(2)

(3)

For this type of fitting, it is necessary to ensure sealing around the piping.

*Consult your EuroCave distributor

IV- Discharging condensate

The conditioner was designed to allow condensate to be discharged (discharge pipe located under the conditioner’s housing) either inside the cellar, if the humidity level is too low, or outside the cellar.

Simply pass the pipes through the wall to discharge the condensate into the room next to the conditioner housing.

Ensure that the piping is not cramped.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents March Contents Servic E DU VIN AU Verre Welcome to the World of Eurocave Usual wine serving temperaturesHOT AIR Conditioner DescriptionElectrical Power Supply Technical Specifications Insulation boards dierent methods of tting are possible Insulate yes but how?General points Installing the ConditionerIII- Fitting II- Drilling the wallPage Fitting close to the floor Fitting onto a doorConditioner with air extraction via piping Conditioner housed outside the cellarConditioner housed inside the cellar IV- Discharging condensateConditioner Operation Remote control description Installing the Remote ControlII- Installing the remote control inside the cellar Connecting the sensor to the remote control III- Installing the remote control outside the cellarFitting Programming the remote controlIII- Remote control description II- Switching onOnnection Setting the temperature IV- Installing the remote controlVI- Silent function VIII- C hanging the remote control batteriesVII- Heating function IX Discharging condensateOperating Faults Maintenance12 GB Around Wine

25, 50 specifications

The Eurocave 50,25 is a premium wine cellar designed for both wine enthusiasts and collectors, providing an optimal storage solution to preserve and enhance the quality of fine wines. With a sleek and stylish design, this model not only serves a functional purpose but also adds a touch of elegance to any interior space.

One of the standout features of the Eurocave 50,25 is its capacity. It can accommodate up to 50 bottles, making it suitable for both moderate and larger collections. The cellar is designed to store your bottles horizontally, ensuring that the corks remain moist and preventing oxidation. This thoughtful design helps maintain the wine's integrity over time, ensuring that each bottle is ready to be enjoyed when the time comes.

The Eurocave 50,25 is equipped with advanced temperature control technology, allowing users to set and maintain the perfect storage conditions for their wines. With a temperature range of 5 to 20 degrees Celsius, this wine cellar is highly versatile, catering to the needs of different wine types, including reds, whites, and sparkling wines. The cellar features precise electronic controls that ensure consistent temperatures, eliminating the risk of detrimental fluctuations.

Moreover, the Eurocave 50,25 employs a dual-zone cooling system, which enables the separation of storage environments within the cellar. This feature allows wine enthusiasts to store various types of wines at their ideal temperatures simultaneously, catering to a diverse collection.

Another significant characteristic of the Eurocave 50,25 is its humidity control technology. Maintaining optimal humidity levels is crucial to prevent cork deterioration and evaporation of wine. This wine cellar features a built-in humidification system, ensuring a stable level of humidity around 50-80%, which is ideal for wine storage.

In addition to its functional features, the Eurocave 50,25 is designed with aesthetic appeal in mind. The unit comes with a sleek, contemporary design and soft interior lighting, allowing users to display their wine collection attractively. The insulated glass door provides visibility while protecting the bottles from harmful UV rays.

Overall, the Eurocave 50,25 combines state-of-the-art technologies with an elegant design, making it an ideal choice for serious wine collectors and casual enthusiasts alike, who value quality storage and display solutions for their prized wine selections.
Top Page Image Contents