Eurocave 50, 25 installation instructions Fitting onto a door, Fitting close to the floor

Page 12

7- INSTALLING THE CONDITIONER

-Position and ￿t the aesthetic front panel to the wall (screws not supplied). Use screws suitable for the wall material(11).

-We recommend that you put a bead of silicone between the panel and the wall to ensure e￿ective sealing.

-Fold the ￿ange’s 4 supports inwards (12).

-Place the ducts onto the ￿anges ensuring that they are well secured on the supports(13).

-Push the 4 supports towards the outside of the ￿ange(14).

-On the side of the conditioner to be placed against the wall unscrew the 2 grids from the housing using the supplied Hex wrench and retain the screws.) (15).

(11)

(12)

(13)

(14)

(15)

-Using the screws retained in the last instruction, screw the 2 grids onto the aesthetic front panel(16).

-Unscrew the 2 screws on the top of the conditioner using a Hex wrench (supplied), on the side to be placed against the wall. Retain the two screws (17).

-Fix the conditioner housing to the metallic frame, taking care to press ￿rmly onto the foam(18).

-Screw down the conditioner housing using 2 screws at the top (those retained earlier) and 2 screws at the bottom (supplied inthe accessories packet) (19).

(16)

(17)

(18)

(19)

•Fitting onto a door:

You can ￿t the conditioner onto a door.

In this case, it is ESSENTIAL to check that the door is capable of supporting a weight of 46 kg and that it does not produce vibration. The procedure for ￿tting is the same as for the wall.

•Fitting close to the floor:

When the conditioner is ￿tted close to the ￿oor it is ESSENTIAL that it is ￿xed to the wall.

•Conditioner with air extraction via piping:

Repeat the steps described at the beginning of paragraph III.

Conditioner housed outside the cellar:

-On the conditioner housing, unscrew the 2 grids (openings that will not be placed against the wall) using a Hex wrench (supplied).

-Where the grids were located, position and screw, using a Hex wrench (supplied) the 2 ￿anges* onto the housing(1) and (2).

-Fit together the reducer* (3).

-Position the air extraction piping (standard piping, 160 mm in diameter, not supplied).

(1)

*Consult your EuroCave distributor

(2)

(3)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents March Contents Servic E DU VIN AU Verre Usual wine serving temperatures Welcome to the World of EurocaveConditioner Description HOT AIRElectrical Power Supply Technical Specifications Insulate yes but how? Insulation boards dierent methods of tting are possibleInstalling the Conditioner General pointsII- Drilling the wall III- FittingPage Fitting onto a door Fitting close to the floorConditioner with air extraction via piping Conditioner housed outside the cellarIV- Discharging condensate Conditioner housed inside the cellarConditioner Operation Installing the Remote Control Remote control descriptionII- Installing the remote control inside the cellar III- Installing the remote control outside the cellar Connecting the sensor to the remote controlProgramming the remote control FittingII- Switching on III- Remote control descriptionOnnection IV- Installing the remote control Setting the temperatureVIII- C hanging the remote control batteries VI- Silent functionVII- Heating function IX Discharging condensateMaintenance Operating Faults12 GB Around Wine

25, 50 specifications

The Eurocave 50,25 is a premium wine cellar designed for both wine enthusiasts and collectors, providing an optimal storage solution to preserve and enhance the quality of fine wines. With a sleek and stylish design, this model not only serves a functional purpose but also adds a touch of elegance to any interior space.

One of the standout features of the Eurocave 50,25 is its capacity. It can accommodate up to 50 bottles, making it suitable for both moderate and larger collections. The cellar is designed to store your bottles horizontally, ensuring that the corks remain moist and preventing oxidation. This thoughtful design helps maintain the wine's integrity over time, ensuring that each bottle is ready to be enjoyed when the time comes.

The Eurocave 50,25 is equipped with advanced temperature control technology, allowing users to set and maintain the perfect storage conditions for their wines. With a temperature range of 5 to 20 degrees Celsius, this wine cellar is highly versatile, catering to the needs of different wine types, including reds, whites, and sparkling wines. The cellar features precise electronic controls that ensure consistent temperatures, eliminating the risk of detrimental fluctuations.

Moreover, the Eurocave 50,25 employs a dual-zone cooling system, which enables the separation of storage environments within the cellar. This feature allows wine enthusiasts to store various types of wines at their ideal temperatures simultaneously, catering to a diverse collection.

Another significant characteristic of the Eurocave 50,25 is its humidity control technology. Maintaining optimal humidity levels is crucial to prevent cork deterioration and evaporation of wine. This wine cellar features a built-in humidification system, ensuring a stable level of humidity around 50-80%, which is ideal for wine storage.

In addition to its functional features, the Eurocave 50,25 is designed with aesthetic appeal in mind. The unit comes with a sleek, contemporary design and soft interior lighting, allowing users to display their wine collection attractively. The insulated glass door provides visibility while protecting the bottles from harmful UV rays.

Overall, the Eurocave 50,25 combines state-of-the-art technologies with an elegant design, making it an ideal choice for serious wine collectors and casual enthusiasts alike, who value quality storage and display solutions for their prized wine selections.
Top Page Image Contents