Eurocave 25, 50 installation instructions Maintenance, Operating Faults

Page 21

11 - MAINTENANCE

It is necessary to thoroughly clean the conditioner’s internal elements every year.

-Unplug the appliance.

-Place the appliance on the ground to disassemble it (4 screws).

-Vacuum the 4 air entry and exit grids.

-Remove the upper cover (2 screws) (1).

-Snap o￿ from the top the 2 columns in order to access the 8 screws of the 2 front sections (2).

-Disassemble the front sections by removing the screws (square end pieces, not supplied).

-Thoroughly clean the ribs of the 2 exchangers with a vacuum cleaner(3).

-Repeat these instructions in the opposite order to reassemble the appliance.

Ribs of the

2 exchangers

(1)

(2)

(3)

12 - OPERATING FAULTS

If the conditioner is not working, there may be loss of synchronism between the appliance and the remote control.

Synchronising procedure:

-Remove the conditioner housing upper cover (4 screws) (1).

-To turn on the remote control, press and hold down the key for about 8 seconds, until the indicator goes o￿.

-Place the switch, located under the conditioner, in position 1.The green LED on the board comes on(2).

-Press and hold down the On/O￿ button (brown button) on the board for more than 6 seconds, then release(3). The green LED will then start to ￿ash (synchronising mode).

(1)

- Simultaneously press the

and

(2)

 

 

(3)

 

 

Green LED

 

 

keys on the remote control until ! is displayed

.

On/ o￿ button

-As soon as the green LED on the board stops ￿ashing (end of synchronising mode), the conditioner and remote control are thensynchronised.

-Exit "RF" mode by pressing thekey on the remote control.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents March Contents Servic E DU VIN AU Verre Welcome to the World of Eurocave Usual wine serving temperaturesHOT AIR Conditioner DescriptionElectrical Power Supply Technical Specifications Insulation boards dierent methods of tting are possible Insulate yes but how?General points Installing the ConditionerIII- Fitting II- Drilling the wallPage Fitting close to the floor Fitting onto a doorConditioner with air extraction via piping Conditioner housed outside the cellarConditioner housed inside the cellar IV- Discharging condensateConditioner Operation Installing the Remote Control Remote control descriptionII- Installing the remote control inside the cellar Connecting the sensor to the remote control III- Installing the remote control outside the cellarFitting Programming the remote controlII- Switching on III- Remote control descriptionOnnection Setting the temperature IV- Installing the remote controlVI- Silent function VIII- C hanging the remote control batteriesVII- Heating function IX Discharging condensateOperating Faults Maintenance12 GB Around Wine

25, 50 specifications

The Eurocave 50,25 is a premium wine cellar designed for both wine enthusiasts and collectors, providing an optimal storage solution to preserve and enhance the quality of fine wines. With a sleek and stylish design, this model not only serves a functional purpose but also adds a touch of elegance to any interior space.

One of the standout features of the Eurocave 50,25 is its capacity. It can accommodate up to 50 bottles, making it suitable for both moderate and larger collections. The cellar is designed to store your bottles horizontally, ensuring that the corks remain moist and preventing oxidation. This thoughtful design helps maintain the wine's integrity over time, ensuring that each bottle is ready to be enjoyed when the time comes.

The Eurocave 50,25 is equipped with advanced temperature control technology, allowing users to set and maintain the perfect storage conditions for their wines. With a temperature range of 5 to 20 degrees Celsius, this wine cellar is highly versatile, catering to the needs of different wine types, including reds, whites, and sparkling wines. The cellar features precise electronic controls that ensure consistent temperatures, eliminating the risk of detrimental fluctuations.

Moreover, the Eurocave 50,25 employs a dual-zone cooling system, which enables the separation of storage environments within the cellar. This feature allows wine enthusiasts to store various types of wines at their ideal temperatures simultaneously, catering to a diverse collection.

Another significant characteristic of the Eurocave 50,25 is its humidity control technology. Maintaining optimal humidity levels is crucial to prevent cork deterioration and evaporation of wine. This wine cellar features a built-in humidification system, ensuring a stable level of humidity around 50-80%, which is ideal for wine storage.

In addition to its functional features, the Eurocave 50,25 is designed with aesthetic appeal in mind. The unit comes with a sleek, contemporary design and soft interior lighting, allowing users to display their wine collection attractively. The insulated glass door provides visibility while protecting the bottles from harmful UV rays.

Overall, the Eurocave 50,25 combines state-of-the-art technologies with an elegant design, making it an ideal choice for serious wine collectors and casual enthusiasts alike, who value quality storage and display solutions for their prized wine selections.
Top Page Image Contents