Maintenance, Operating Controls | Delfield 18600VD specs

Versa Drawer™ Refrigeration Units

OPERATION

OPERATING CONTROLS

All operating functions are accessible on the Versa Drawer control panel. Operators can select the drawer modes or activate the manual defrost. Access to

all diagnostic functions require a qualified service technician.

1		3	Buttons are located next to the drawer display on
1		3	the Control Panel. The drawer select buttons select
2
2	4		the drawer to be configured.
			the drawer to be configured.

These arrows are used to change a drawer to operate in a desired mode (refrigerate, freezer, thaw or chill).

Used to back up to the previous step.

The i button is used to initiate the manual defrost mode.

Setting the drawer mode

2-Drawer Interface Control

4-Drawer Interface Control

MAINTENANCE

Select the drawer mode as follows:

1.Press the button next to the drawer display to be changed.

NOTE: Current drawer mode text size will decrease.

2.Press the UP or DOWN arrow to select between refrigerate, freeze, chill or thaw untill desired mode is reached.

3.Press the drawer display button again to lock the desired mode setting.

Setting the Clock:

1.Press thebutton until “Program Menu” appears.

2.Press the button until brackets are around “Time & Date”, then press .

3.Press button to get to parameter to be adjusted.

Note: The [^] under the text show parameter to be adjusted.

4. Press the buttons to adjust parameter.

NOTE: Text size will return to original size.

Activating Manual Defrost

NOTE: The following two steps must be performed within 1 second.

5.Once correct time and date are set press the button twice to return to the main display screen. (If no action is taken for 30 seconds control automatically returns to main display screen).