Aiwa CSD-ED 37, CSD-ED67, CSD-ED 57 manual Tuning

REPEAT/

FM MODE/

Osc

~Press *RADIO/BAND repeatedly to select the

desired band.

~FM--+AMT

The power is turned on and the previously tuned station is received.

The RADIO indicator lights up.

*or BAND on the remote control when the AC cord is connected (except CSD-ED37)

z Press	1+4, BI	(+, –	TUNING)	to select a
station.
During	FM stereo	reception,	~	is displayed.

After listening, press POWER (!) STANDBY to turn the power off.

For better reception $% P

Extend	the	FM antenna and	The AM		antenna	is inside
orient	it for	the best reception.	the	unit.	Position	the unit
			for	the best reception.

For quick tuning

Keep i-, – TUNING pressed until the tuner starts searching for a station. When a station is tuned to, the search stops.

If the broadcast signal is weak, it does not stop. To stop the search manually, press -1- or –.

*REPEAT/FM MODE/OSC

-If an FM stereo broadcast contains noise, press the

button so that _ is displayed.

Noise is reduced, although reception is monaural. To restore stereo reception, press the button again.

-If a high-pitched sound is heard during AM recording,

press the button repeatedly until the noise is reduced. Its position can be checked by “*”being on or off the display.

*or MODE on the remote control (except CSD-ED37)

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows.

1Press RADIO/BAND to display FM.

2Press ■ while pressing RADIO/BAND to display the AM frequency.

When the AM tuning interval is changed, the preset stations are cleared.

-

STOPIMEMORY~

@@

– TUNING+

POWER(!)STANDBY BAND

TAPE H ““’0 I-kL.J

NOTE

If the unit picks up noise from other electrical appliances

nearby, like a TV or fluorescent lights, move the unit.

You can preset up to 15 stations in each band.

Select a station.

Press *9 STOP/MEMORY once so that “M” is displayed to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

“M”may not be displayed if the button is kept pressed for more than 0.5 second.

Preset number

Frequency

* or ■ on the remote control (except CSD-ED37)

BRepeat steps 1 and 2.

The next station will not be stored if a total of 15 preset stations have already been stored for a band.

TO listen to preset stations

Select a band then press -11 PLAY/PAUSE/PRESET repeatedly.

-PLAY on the remote control is also available.

To select a preset number directly with the remote control (except CSD-ED37)

Press the numbered buttons O-9 and +1 O.

Example:

To select number 15, press +10 and 5.

To select number 10, press +10 and O.

To clear a preset station

Display the preset number first. Then, press ■ while the preset number is displayed.

The higher numbers in the band are decreased by one,

4ENGLISH