ATTO Technology 463-248-202 manual Music Source Interface, Music Input Connections

Page 33

Music Source Interface

Music Input

To provide background music for your paging system, a music source can be connected to your AmpIiCenter at the 10-position connector on the rear. The audio source can be a CD player, AM, FM, or commercial radio, tape player, or other audio device. Since most music sources are stereo, left and right channel inputs are combined in the AmpliCenter. Monophonic sources can be connected to either left or right input with the other not connected.

You can adjust the music volume level, ducking level (volume of music while voice page is active) by means of volume controls on the rear of the AmpliCenter.

The AmpliCenter unit amplifies and distributes the music signal to the paging zones.

The PagePac Plus AmpliCenter has a screw strip connector that ties down the cabling from the music source. Refer to figure 3-7.

SHIELDED CABLE

OUT TO SPEAKERS

FROM EXTERNAL

MUSIC SOURCE

Figure 3-7. Music Input Connections

3-12lnstalling the Hardware

Page 32 Page 34
Image 33
Page 32 Page 34
Contents PagePac Plus AmpliCenter Trademarks Overview N t e n t sInstalling the Hardware B l es Controls and Indicators, Terminals and ConnectorsFigures Overview ContentsHow to Use This Guide About This GuideBefore You Start Installation Steps Installation StepsPagePac Plus Connectivity Chart Connectivity ChartLoop 600 Ω PagePac Plus Connectivity Chart ContinuationHow to Comment on This Guide Product Safety LabelsTerminology Reference MaterialsShipping Container Contents Ordering Information PagePac Plus AmpliCenter Features and CapabilitiesAmpliCenter Specifications SpecificationsHardware Configuration Power Circuit ProtectionMounting Universal Approvals Controls and Indicators, Terminals and ConnectorsControls and Indicators, Terminals and Connectors Auxiliary Equipment Installing the Hardware Additional Safety Instructions for Installation Personnel Important Safety InformationAmpliCenter without Controller, with Series AmpliCenters Example System Setup Amplicenter Interface with ControllerController Series AmpliCenters, without Controller Tools Required Mounting PagePac Plus AmpliCenterFront Detail Speaker Run Method Connecting SpeakersTelephone System Interface Telephone Mode Switch10Installing the Hardware Connection to AmpliCenter Music Input Connections Music Source InterfaceSystem Testing Apply AC PowerAudio Paging Zones Dtmf digit Maintenance and Customer Support Case of Difficulty Power Failure Operation Common ProblemsTroubleshooting Answer TroubleshootingAmpliCenter Electrical Block Digram Electrical Block DiagramFCC Statement Part Radio Frequency Interference FCC Statement and Warranty Information2FCC Statement and Warranty Information Installation and Maintenance Information Feedback Form How are we doing? FCC D exRack mounted hardware Diagram AT&T
Top Page Image Contents