Glen Dimplex Home Appliances Ltd 82757900 manual Using the CLOCK/PROGRAMMER Electric, Mode

USING THE CLOCK/PROGRAMMER - ELECTRIC

THE ALTERNATIVE PROGRAMMERS

There are two types of programmer cov- ered in this section - push button & touch control. Both programmers have the same symbol variants & functions but may vary in their method of operation.

The push button programmer

Sym-	Sym-	What is it?
bol	bol
		Down/minus
	-	Used to decrease cook
		/ end time, remove
		minutes from the
		minute minder and
		adjust the time of day.
		Also for listening to
		and setting the alarm
		tone.
		Up/plus
	+	Used to increase
		cook / end time, add
		minutes to the minute
		minder and adjust the
		time of day.
		Function button
		Used to select the
FUNC-	MODE	functions available on
TION		this timer.
or		Press once for: Minute
		Minder.
		Press twice for: Cook
		time
		Press three times for:
		End time.
		How to use these
		functions is explained
		later on in this sec-
		tion.

The ‘function’ button in the centre is used for setting the minute minder and setting up the automatic cooking. See below for details.

Symbols on the LED display.

This ‘A’ symbol appears when either a semi, or fully automatic program is selected. This symbol will flash while a program is being set.

Once a program is set the symbol will light up, and remain lit until the alarm sounds, or the program is cancelled.

This bell symbol appears when the Minute Minder function has been selected.

While the Minute Minder is being set, the Bell symbol flashes. Once the length of time is set, the Bell symbol remains lit until the time runs down, or the function is cancelled.

This message and ‘A’ symbol appear when you are asked to set the length of time you require the oven to cook automati- cally for.Using the Up and Down buttons adjusts this accordingly.

This message and ‘A’ symbol appear when