Glen Dimplex Home Appliances Ltd 82757900 manual Prepare Installation, Housing unit

Page 26

INSTALLATION

STEP 1 : PREPARE INSTALLATION

Do not lift the appliance by the door handle.

Whilst every care is taken to elimi- nate burrs and raw edges from this product,please take care when handling

-we recommend the use of protective gloves during installation.

Please note that the weight of this appliance is approximately 31kg (unpacked). Take care when lifting it into the housing unit - always use an appropriate method of lifting.

Remove the fixing screws from the

polythene bag on the top of the appli- ance, but leave the appliance in the base tray packaging until you are ready to install it.

If this appliance is to be installed near to a corner where the adjacent cabinets run at right angles forward of the appliance, there must be a gap of at least 90 mm between the appliance and the cabinets, to prevent overheating of the cabinets.

Housing dimensions

The appliance is designed to fit into a

standard 600mm wide housing unit with minimum internal dimensions as shown. 590mm is to the underside of the worktop

when the appliance is built under, or to the underside of the panel above, when the appliance is installed into a tall

housing unit.

Image 26
Contents Part No 082757900 Date Contents & Introduction General SafetyBefore Using the Product Oven / GrillMicrowave Oven Function Controls Using the 800W Microwave OvenDisplay Screen Combination Cooking Cooking with the microwave ovenGrill Cooking Auto CookingQuick Start Preset FunctionWeight Defrost Child LockUsing aluminium foil Using the Grill ElectricUsing the grill Detachable grill pan handleOven Furniture Using the Main Oven ElectricPreheating Slow cooking Setting or 100C Aluminium foilDefrosting and cooling in the main oven Main Oven Baking Guide Cooking times & temperaturesTo help the air circulate freely Defrosting timesConventional temperature ‘A’ Efficiency Oven Gas Mark Christmas cakeTraditional fruit cakes Roast turkey180C 200C conventional Beef Roasting guide160C 180C fanned LambMode Using the CLOCK/PROGRAMMER ElectricAlternative Programmers You are asked to enter in an end time, or When you would like the oven to switch Itself offTo select an alarm tone To set the time of daySemi-automatic cooking Fully automatic cookingEnd time method SEMI-AUTOMATIC CookingDuration method Fully Automatic Cooking EX Ample Touch control programmer Setting the minute minder Setting the time of daySetting an alarm tone Method 2 end time switch off at a set end timeFully automatic cooking Cleaning Shelf Runners Removing Oven Parts for CleaningInner Door Glass Microwave Oven Housing dimensions Appliance is designed to fit into a InstallationPrepare Installation Housing unitInstallation 60CM Installing the appliance under a worktopQuantity Colour Description For Fixing Installation 70CMBefore you start Make sure they are the right way up as shown Method 1 Without Housing Unitbetween 2 Base UnitsFixing Kit Method 2 Housing Unit with Internal Height Less than 710MM Method 3 Housing unit with internal height 710mm or more Fixing to adjacent cabinets, floor or WorktopInstallation 90CM Prepare InstallationDimensions For 70/90cm appliances Connect to the ELEC- Tricity SupplyFor 60cm BI appliance 70cm only Housing UnitSecure Appliance Into 60cm ovensEdging strip if fitted Cabinet when the screws are fully homeAnti-stain trim if fitted Edging strip is factory fitted toTechnical Data Electric ProductsCustomer Care Product De Where used Purpose Scription Customer Care WEB ShopReplace. Replace the lens cover Changing Light Bulbs where fittedPull it away from the side BackPage Page Page Ovens Service Record0844 815