Glen Dimplex Home Appliances Ltd 82757900 manual Touch control programmer

USING THE CLOCK/PROGRAMMER - ELECTRIC

The touch control programmer

There are three touch control icons for this timer - the table below shows you what the symbols look like, depending on the model type, & their functions.

Note - some functions require you to ‘touch & hold’ an icon for a few seconds, whilst others require you to just ‘touch’ the icon without holding.

Sym-	Sym-	What is it?
bol	bol
	-	Down/minus
		Used to decrease
		cook / end time, re-
		move minutes from
		the minute minder
		and adjust the time
		of day. Also for lis-
		tening to and setting
		the alarm tone.
		Up/plus
	+	Used to increase
		cook / end time,
		add minutes to the
		minute minder and
		adjust the time of
		day.
		Function icon
		Used to select the
FUNC-	MODE	functions available
		on this timer.
TION
		Touch once for:
		Minute Minder.
		Touch twice for:
		Cook time
		Touch three times
		for: End time.
		How to use these
		functions is ex-
		plained later on in
		this section.

The ‘function’ icon in the centre is used for setting the minute minder & setting up the automatic cooking - see below for details.

Symbols on the LED display.

This ‘A’ symbol appears when either a semi, or fully automatic program is selected. This symbol will flash while a program is being set.

Once a program is set the symbol will light up, and remain lit until the alarm sounds, or the program is cancelled.

This Bell symbol appears when the Minute Minder function has been selected.

While the Minute Minder is being set, the Bell symbol flashes. Once the length of time is set, the Bell symbol remains lit until the time runs down, or the function is cancelled.

This message and ‘A’ symbol appear when you are asked to set the length of time you require the oven to cook automatically for. Using the Up and Down icons adjusts this accordingly.

This message and ‘A’ symbol appear when you are asked to enter in an end time, or when you would like the oven to switch itself off.