USING THE CLOCK/PROGRAMMER - ELECTRIC
Setting the time of day
Touch & hold the centre (function) icon for a few seconds until the ● symbol between the numbers on the LED display flashes.
While the ● symbol is flashing, you can adjust the time of day by touching the plus & minus icons. Please note: the hours & minutes adjust quickly.
Important - once the time of day has been set, allow approximately 30 seconds before using any of the other programmer functions. This ensures that the time of day will remain correct.
Setting an alarm tone
Touch & hold the plus & minus icons simultaneously until the ● symbol flashes
&you hear a beep - then touch the centre (function) icon.
Touch the minus icon to select the tone.
You can change the tone by repeatedly touching the minus icon - there are three tones to choose from.
Setting the minute minder
To set the minute minder, touch & hold the centre (function) icon until the bell symbol appears & begins to flash. Important - the flashing will last for approximately five seconds, so any setting must be carried out within this time frame.
Touch the plus & minus icons to set the length of time required. Once this has been done, the minute minder is set.
When the desired length of time has counted down, the alarm will sound. To cancel the tone, touch & hold any of the icons.
To cancel the minute minder at any time, touch & hold the plus & minus icons together.
Method 1 - duration (switch of after set time period):
Touch & hold the centre (function) icon; the bell will flash & you will hear a beep. Touch the centre (function) icon again
-this will skip past the minute minder function.
The display will flash the word ‘dur’ & the ‘A’ will flash on the left hand of the display.
Use the plus & minus icons to set the length of time you want to cook for. The flashing will last for approximately five seconds, so the setting must be done within this time frame or the time of day will show again.
Once the duration has been set, the oven will automatically switch off. When the set time has elapsed the alarm will sound. To switch the alarm off, touch any icon.
To view any remaining time, touch & hold the centre (function) icon & touch again.
To cancel the
Method 2 - end time (switch off at a set end time):
Touch & hold the centre (function) icon; the bell will flash & you will hear a beep. Touch the centre (function) icon again
-twice - this will skip past the minute minder & duration functions.
The display will flash the word ‘End’ & the ‘A’ will flash on the left hand of the display.