CLEANING
REMOVING OVEN PARTS FOR CLEANING
Inner Door Glass
•The inner door glass panel can be removed for cleaning but it must be replaced the right way up. If there is any writing on the glass, you must be able to read it clearly when the cavity doors are open.
•Always make sure that the glass is pushed fully into the Stop position.
•To remove the glass panel, open the door wide, hold the top and bottom edges and slide out.
•Warning: do not operate the appli- ance without the glass panel correctly fitted.
•For your safety, glass door panels are made of toughened glass. This en- sures that, in the unlikely event that a panel breaks, it does so into small fragments to minimise the risk of in- jury. Please take care when handling, using or cleaning all glass panels, as any damage to the surfaces or edges may result in the glass breaking without warning or apparent cause at a later date. Should any glass panel be damaged, we strongly recommend that it is replaced immediately.
Shelf Runners
•Shelf runners can be removed to enable you to clean them thoroughly. Make sure they are cool to touch and then grasp the runners and slide out of their hanging holes.
PULL OUT TO CLEAN