Creda R430E, E430E, N230E Grill Pan and Handle, Grill Pan Food Grid and Anti-Splash Tray, Step

Grill Pan and Handle

The grill pan handle is detachable from the pan, to facilitate cleaning and storage. The grill pan handle can be fixed as follows:

(a)

Step 1

(b)

Step 2

(c)

Step 3

(d)

Step 4

Step 1 Remove the screw and washers from the grill pan bracket (a). Step 2 Tilt the handle over the recess (b).

Step 3 Slide it towards the centre of the pan (c).

Step 4 Locate the handle over the bracket (d).

For a fixed handle, replace the screw and washers and ensure they are fully tightened up. If a detachable handle is required, do not replace the screw and washers.

Note: If a fixed handle is required, the grill pan cannot be kept in the main oven with the door closed but may be stored in the top oven with the door closed, when the top oven is not in use..

Grill Pan Food Grid and Anti-Splash Tray

GRILL PAN	ANTI-SPLASH	GRILL PAN	FOOD GRID
	TRAY (Not on N230
	model)

Note: To stop fat splashing onto the grill mesh, it is important to use the anti-splash tray as shown in the grilling chart. Always clean the grill pan, anti-splash tray and food grid after each use.

Top Oven Shelf Positioning for Grilling

ENSURE SHELVES ARE FITTED CORRECT WAY UP.

3	3
2	2
1	1

DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE OVEN FLOOR

NOTE: Preheat the grill if indicated on grill chart.

The grill pan must be placed on the correct shelf and positioned centrally under the grill element.

Leave the control at 6 for toast, and for fast cooking of foods.

For thicker foods requiring longer cooking, turn the switch to a lower setting after the initial sealing on both sides at 6. The thicker the food, the lower the control should be set. DO NOT line the grill pan with aluminium foil, as this increases the amount of fat spitting which can cause a fire.

After use always return both controls to their OFF (0) position.

15