Care and Cleaning
Warning: Before cleaning, please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold.
1. “CREDACLEAN” OVEN LINERS (E430E / N230E)
(a) How "Credaclean" works.
TOP OVEN SIDE LINERS
MAIN OVEN SIDE LINERS
AND REAR PANEL
The surfaces of the "Credaclean" oven liners are treated with a special vitreous enamel which absorbs cooking soils.
At temperatures of 220°C (425°F) or above, the special surface enables these soils to be slowly destroyed.
The higher the temperature the more effective it is.
(b) Cleaning.
In most cases normal cooking operations at 220°C (425°F) will permit this cleaning operation to proceed during cooking. However if higher cooking temperatures are not used regularly, it may be necessary, in order to prevent heavy soiling, to run the ovens without shelves or meat pan, at a maximum setting for a couple of hours.
It should not normally be necessary to clean the "Credaclean" panels with water. If the user feels it is desirable to do so, wipe them over with a clean, soapy cloth, followed by a wipe with a clean damp cloth.
2. VITREOUS ENAMEL OVEN LINERS (R430E)
(a) Cleaning.
These can be cleaned by wiping them over with a clean soapy cloth, followed by a wipe with a clean damp cloth. For more stubborn stains on the side liners use a well soaped, fine steel wool soap pad.
DO NOT use biological washing powder, harsh abrasives or chemical oven cleaners of any kind as this could damage the “Credaclean” and Vitreous Enamel oven liners.
29