Creda CF50E manual Installation, Siting the Cooker

Page 5

Installation

Siting the Cooker

mm

150 mm

650

 

150 mm

 

WARNING – THIS APPLIANCE MUST BE EARTHED.

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the rear panel. The cooker must be connected by a competent person such as one who is NICEIC registered, to suitable double- pole control unit with a minimum rating of 45A and a minimum contact clearance of 3mm, which should be fitted adjacent to the cooker, in accordance with latest IEE regulations.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2 minimum.

The control unit should be easily accessible in the event of an emergency, but must be within 2 metres of and not directly above an appliance.

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Access to the mains terminals is gained by removing the rear access cover.

The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

This cooker is a type X appliance, as such adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer 650mm.

Note: This appliance must not be fitted on a platform.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CF50E Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents 89/336/EEC 73/23/EEC 92/31/EEC 93/68/EEC IntroductionDisposal of your product Siting the Cooker InstallationMoving the Cooker Always Safety InformationExtinguisher is likely to tip the pan over Safety Information NeverEvent of a chip pan fire or any other pan fire Features Control Panel Hotplates Ceramic HobAluminium Stainless steel with single layer Copper base General Information Notes Ceramic HobsCeramic Halogen Do Not Extinguisher is likely to tip the pan over Safety requirements for deep fat fryingRemember Choosing Your UtensilsChoosing your utensils Choosing Your Utensils Oven Temperature Conversion ChartConvection Fan Grill is in USE. Children should be Kept Away SpeedgrillRecess GrillingNever line grill pan with foil Fix the grill pan handle securely in position. See belowFillets Guide To GrillingHeat Oven Temperature Charts Meat Oven Temperature Charts Baking Oven Cookery Notes TemperatureOven Positions TimeTo prepare meat and poultry for roasting in your fan oven Room temperature allowing 2-3 hours per 450g, 1lbFrozen Meat PoultrySlow Setting Using the Oven for Other FunctionsCeramic hob Grill Compartment Speedgrill Control Panel Care and CleaningDecorative Trims Doors Oven Oven Liners Oven Baking Problem Check GrillingCooking Results Not Satisfactory? Something Wrong with your Cooker? Page Page For further product information 08701 54 64 Key Contacts

CF50E specifications

The Creda CF50E is a versatile and efficient electric cooker designed to meet the needs of both home cooks and baking enthusiasts. This model stands out not only for its stylish appearance but also for its practicality and advanced cooking technologies.

One of the key features of the Creda CF50E is its spacious oven capacity, which allows for cooking multiple dishes simultaneously. With a generous usable space, home chefs can roast large cuts of meat, bake several trays of cookies, or prepare complex meals without the need to compromise on size. The oven is equipped with multiple cooking functions, including top heat, bottom heat, and grill settings, providing flexibility for different cooking methods.

The ceramic hob is another significant aspect of the CF50E, featuring four cooking zones that deliver quick and even heat. This makes boiling, frying, and simmering tasks efficient and straightforward. The smooth surface of the hob not only enhances the aesthetic appeal but also makes cleaning a breeze, as spills can be wiped away effortlessly.

In terms of technology, the Creda CF50E incorporates a double-glazed door and internal oven light, ensuring that users can monitor their cooking without frequently opening the door and losing heat. The temperature control is precise, allowing users to select the desired level for different recipes, which ensures optimal cooking results.

Safety is also a priority in the design of the CF50E. It features a child safety lock and non-slip feet, ensuring stability during use. Additionally, the oven includes an auto shutdown feature, providing peace of mind by reducing the risk of overheating or fire hazards.

Moreover, the Creda CF50E is engineered with energy efficiency in mind. The insulation and design minimize heat loss, which not only helps in maintaining a consistent cooking temperature but also reduces energy consumption over time.

In conclusion, the Creda CF50E is an excellent choice for those searching for a reliable cooker that combines modern features with user-friendly operation. Its spacious oven, efficient ceramic hob, and focus on safety and energy efficiency make it a practical addition to any kitchen. Whether for everyday meals or special occasions, the CF50E provides the performance and flexibility that cooks desire.
Top Page Image Contents