8.To remove wind guide assembly.
1)Remove the screw for earthing.
2)Remove the noise filter from the wind guide.
3)Remove the screw which secure the wind guide assembly.
4)Draw forward the wind guide assembly.
5)Pull the fan from the motor shaft.
6)Remove two screws which secure the motor shaded pole.
7)Remove the motor shaded pole.
8)Reverse the above steps for reassembly.
9.To remove H.V.transformer.
1)Remove four screws holding the H.V.transformer.
2)Remove the H.V.transformer.
3)Reverse the above steps for reassembly.
14