Daewoo Microwave Oven, KOR-6N575S service manual To remove cabinet, To remove door assembly

Page 10

1.To remove cabinet

1)Remove three screws on cabinet back.

2)Pull the cabinet backward.

2.To remove door assembly

1)Remove the screw which secure the stopper hinge top.

2)Remove the door assembly from top plate of cavity.

3)Reverse the above for reassembly.

NOTE : After replacing the door assembly, perform a check of correct alignment with the hinge and cavity front plate.

9

Image 10

Contents Microwave Oven Table of Contents Safety and Precautions For Safe OperationSpecifications KOR-6N575SOuter Dimension External ViewFeature Diagram Safety interlock systemInstallation Leave space behind and sideVariable power cooking Operations and FunctionsDisassembly and Assembly To remove door assembly To remove cabinetTo remove door parts REF no Part Code Part Name Description ’TYPage To remove control panel parts QTYHigh voltage circuit wiring To remove magnetron To remove high voltage capacitorTo remove wind guide assembly To remove H.V.transformerInterlock Mechanism and Adjustment AdjustmentTroubleshooting Guide Trouble 1 Door shut, timer set, but no cooking takes placeYES Procedure Measurement of the Microwave Power OutputMeasurement and Test Procedures Microwave Radiation TestComponent Test Procedure High voltage transformerWiring Diagram Door Assembly Exploded View and Parts ListTotal Assembly Name Part Code Part Name Description QTY Daewoo Electronics Corp About this Manual