Whirlpool GSF26C4EXT manual Electrical Requirements, Water Supply Requirements, Water Pressure

Page 7

NOTES:

This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54"

(137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

Flat-blade screwdriver

¹⁄₄" Nut driver

⁷⁄₁₆" and ¹⁄₂" Open-end or two

¹⁄₄" Drill bit

 

adjustable wrenches

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

All installations must meet local plumbing code requirements.

Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

7

Image 7
Contents Refrigerator User Instructions Refrigerator SafetyUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Tools Needed Door Removal, Leveling and AlignmentReplace the Doors and Hinges Remove the wiring clip using a ¹⁄₄ hex-head socket wrenchDoor Alignment Handle Installation and RemovalTo Install the Handles Leveling and Door ClosingTo Remove the Handles LocationRequirementsStyle 2 Slide-on Parts Included Door handles Reverse Osmosis Water Supply Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect to Refrigerator Connect Water SupplyStyle Connect to Water LineInstalling the Air Filter on some models Install Air FilterInstalling the Filter Status Indicator on some models Install Produce Preserver Refrigerator USE Using the ControlsAdjusting the Controls Condition Temperature AdjustmentWater and Ice Dispensers Convertible Drawer Temperature ControlCrisper Humidity Control Chilled Door BinTo Dispense Ice To Dispense WaterStyle Ice Maker and Storage Bin onsomemodelsTurning the Ice Maker On/Off Removing and Replacing Ice Storage BinWater Filtration System CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator is noisy TroubleshootingRefrigerator Operation Motor seems to run too muchHumid room? Contributes to moisture buildup Temperature and MoistureTemperature is too warm Iceand WaterAccessories Water Filtration System Performance Data SheetDisclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador Instrucciones Para EL Usuario DEL RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónAntes de tirar su viejo refrigerador o congelador Herramientas Necesarias Remoción, nivelación y alineamiento delas puertasVuelva a colocar las puertas y las bisagras Quite las puertasAlineamiento de la puerta Nivelación y cierre de la puertaEstilo 1 Tornillos opresores Cómo instalar y remover las manijasPara instalar las manijas Para quitar las manijasMétodo de conexión a tierra recomendado Requisitos de ubicaciónRequisitos eléctricos Requisitos del suministro de aguaSuministro de agua de ósmosis inversa Conexióndel suministro de aguaEstilo Cómo terminar la instalación Instalación del filtro de aireReemplazo del filtro de aire Cómo instalar el filtro de aire en algunos modelosEn los modelos con muescas En los modelos sin muescasInstalación del indicador de estado en algunos modelos Uso de los controlesCómo ajustar los controles Condición Regulación DE LA Temperatura Control de temperatura del cajón convertibleDespachadores de agua y hielo Depósito enfriador de la puertaPara despachar agua Para despachar hielo Fábrica dehielo y depósitoPara encender y apagar la fábrica de hielo Cómo quitar y volver a colocar el depósito de hielo Sistema de filtración de aguaLuz de estado del filtro de agua Cómo cambiar el filtro de agua LimpiezaCómo cambiar los focos Para limpiar su refrigeradorParece que el motor funciona excesivamente Solución DE ProblemasFuncionamiento delrefrigerador El refrigerador no funcionaHielo y agua Temperatura y humedadNota Esto es una indicación de baja presión de agua Accesorios Sistema de filtración de agua Hoja DE Datos DEL RendimientoEsta garantía limitada no cubre Whirlpool CorporationGarantía Limitada Exclusiones DE LA GarantíaWhirlpool Brand Home Appliances Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage duréfrigérateur Instructions DinstallationAvant de jeter votre vieux réfrigérateur ou congélateur Outillage Nécessaire Retrait, réglage de laplomb et alignement de la porteImportant Ne pas retirer l’une des vis a Enlever les portesRemplacer les portes et les charnières Alignement des portes Nivellement et fermeture de la porteStyle 1 Vis de blocage Installationet démontage des poignéesInstallation des poignées Retrait des poignéesSpécifications del’alimentationen eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauAlimentation en eau par osmose inverse Pression de leauAchever l’installation Installationdu filtre à airModèles avec encoches Installer le sachet deconservation Pour produits fraisInstallation du filtre à air sur certains modèles Remplacement du filtre à airUtilisation DU Réfrigérateur Utilisation des commandesInstallation du témoin lumineux sur certains modèles Ajustement des commandesCaractéristiques supplémentaires Fast Ice glace rapide Alarme de porte entrouverteCondition Ajustement DE LA Température Refroidissement On/Off marche/arrêtCompartiment fraîcheur dans la porte Commande de température dans Le tiroir convertibleDistributeurs d’eauet de glaçons Distribution de glace Distribution d’eauMachine à glaçons et bac dentreposage Pour retirer et réinstaller le bac à glaçonsMise en marche/arrêt de la machine à glaçons Nettoyage de votre réfrigérateur Entretien DU RéfrigérateurSystème de filtrationde leau NettoyageDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Glaçons et eau Température et humiditéLes portes sont difficiles à ouvrir Remarque Cela indique une faible pression de leau Les glaçons sont creux ou petitsHeures pour la fabrication de nouveaux glaçons Filtre à air AccessoiresNettoyant et poli pour acier inoxydable Filtre à eauSystème de filtration d’eau Feuille DE Données SUR LA PerformanceLa présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée Éléments Exclus DE LA GarantiePage Whirlpool Corporation All rights reserved W10297006C EN/FR PN W10281961C

GSF26C4EXT, ED2KHAXVT specifications

The Whirlpool ED2KHAXVT and GSF26C4EXT are two prominent refrigerator models that embody a blend of modern technology and practical design, aiming to enhance the user's kitchen experience. These units offer a range of features tailored to meet diverse household needs, making them standout choices for consumers.

The Whirlpool ED2KHAXVT is a top-freezer refrigerator known for its spacious interior and efficient organization. With an impressive capacity of 21 cubic feet, it provides ample storage for groceries and meal prep, allowing users to easily store everything from large food items to smaller everyday essentials. This model features adjustable spill-proof shelves that are easy to clean and prevent messes from spreading, enhancing the user’s convenience.

One of the key technologies in the ED2KHAXVT is the Adaptive Defrost system, which monitors the compressor run time and only defrosts when necessary. This not only ensures optimal food preservation but also reduces energy consumption, making it an environmentally friendly choice. Additionally, the model includes a dual-temperature controlled crisper drawer, which is perfect for keeping fruits and vegetables fresh longer.

On the other hand, the GSF26C4EXT is a side-by-side refrigerator that offers both style and functionality. It features a striking stainless steel finish, contributing to a modern kitchen aesthetic. With roughly 25 cubic feet of total capacity, it boasts a well-organized interior with adjustable shelves and door bins, designed to keep items easily accessible. The water and ice dispenser located on the door provides instant access to cold water and ice, adding convenience for families and busy individuals.

The GSF26C4EXT incorporates innovative features like the Accu-Chill temperature management system, which uses sensors to regulate the internal temperature, ensuring optimal performance without compromising energy efficiency. Furthermore, the model is equipped with a FreshFlow produce preserver which effectively keeps fruits and vegetables fresh by controlling the ethylene gas levels within the refrigerator.

Both models come with energy-efficient ratings, making them cost-effective choices for daily use. Their thoughtful design and advanced technology cater to the needs of modern households, proving to be reliable appliances that stand the test of time. With versatile storage solutions and reduced energy consumption, the Whirlpool ED2KHAXVT and GSF26C4EXT excel in delivering performance and practicality, sealing their status as preferred selections for discerning consumers.