Whirlpool GR2SHWXPS02 Connect the Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 4

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe.

Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft. (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut onto the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupling (provided)

 

 

4

Image 4
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Remove the PackagingClean Before Using LocationRequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineComplete the Installation Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalRight-Hand Swing to Left-Hand Swing Left-Hand Swing to Right-Hand SwingReplace Doors and Hinges Final StepsDoor Swing Reversal optional Using theControls Adjust the DoorsRefrigerator USE Ice Maker Crisper Humidity ControlWater Dispenser Water FiltrationSystem Cleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTemperature and Moisture TroubleshootingRefrigerator Operation Ice and Water Ice cubes are hollow or smallOff-taste, odor or gray color in the ice Water is leaking from the dispenser systemAccessories Stainless Steel Cleaner & PolishReplacement Filter Water Filter CertificationsProduct Data Sheets Application Guidelines/Water Supply ParametersModel WF-NLC120V Capacity 120 Gallons 454 Liters Limited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesSécurité DU Réfrigérateur RéfrigérateurInstructions Dinstallation Exigences demplacementDéballagedu réfrigérateur Retirer les matériaux d’emballageMéthode recommandée de mise à la terre SpécificationsélectriquesSpécifications del’alimentationen eau Pression de leauRaccordement à la canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Style Portesdu réfrigérateur Achever l’installationDémontage Portes et charnières Réinstallation Portes et charnières Inversion des portes facultatifOuverture vers la droite à ouverture vers la gauche Ouverture vers la gauche à ouverture vers la droiteÉtapes finales Inversion du sens douverture des portes facultatif Utilisation DU Réfrigérateur Utilisationdes commandesAjustement des portes Machine à glaçons Distributeur deauMise en marche/arrêt de la machine à glaçons Taux de production des glaçonsDépose et réinstallation de la palette du distributeur Distribution deau Lumière du distributeurVerrouillage du distributeur Pour verrouiller le distributeurRemplacement des ampoules d’éclairage Entretien DU RéfrigérateurSystème de filtration de leau NettoyageDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauAccessoires Le distributeur deau ne fonctionne pas correctement’eau coule du système de distribution Leau du distributeur est tièdeFeuilles DE Données SUR LE Produit Système de filtration d’eau à la grille de la baseModèle WF-NLC120V Capacité 120 gallons 454 litres Garantie DES Gros Appareils Ménagers Whirlpool Corporation Garantie LimitéeArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pasW10131410A SP PN W10131418A Whirlpool Corporation 10/07 All rights reserved

W10131410A, GR2SHWXPL02, GR2SHWXPQ02, GR2SHWXPS02 specifications

The Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A represent a range of innovative appliances designed to elevate the user experience in modern kitchens. These models blend cutting-edge technology with user-friendly features, making them an ideal choice for anyone seeking efficiency and convenience.

One of the standout features of these Whirlpool models is their spacious interiors, providing ample storage for groceries and meal prep items. Each variant is designed with adjustable shelves, allowing for flexible organization according to personal needs. This adaptability caters to various sizes of food items, such as tall bottles and large containers, ensuring users can maximize their storage potential.

In terms of technology, these refrigerators are equipped with advanced cooling systems that maintain optimal temperatures and humidity levels. This helps in preserving the freshness of food items for longer periods. The incorporation of LED lighting not only adds a modern aesthetic but also enhances visibility, ensuring users can easily locate items even in darker corners.

Energy efficiency is another critical aspect of these models. They are designed to consume less energy while still delivering top-notch performance. This eco-friendly feature not only reduces the carbon footprint but also leads to savings on utility bills, making it a smart investment for budget-conscious consumers.

The intuitive control panels offer simplicity and convenience, allowing users to adjust settings easily. Some models may even incorporate smart technology, enabling users to monitor and control their refrigerator remotely via smartphone applications. This feature provides added peace of mind and makes it easier to manage food inventory, even while away from home.

When it comes to design, the Whirlpool GR2 series stands out with its sleek and modern appearance, available in various finishes that complement any kitchen décor. The stainless steel options not only add sophistication but are also resistant to fingerprints, ensuring that the appliance continues to look sleek with minimal maintenance.

In summary, the Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A offer a blend of spacious storage, advanced cooling technologies, energy efficiency, and modern design. These features make them an excellent choice for individuals and families navigating the demands of contemporary living, setting a high standard for kitchen appliances. With this range, Whirlpool continues to demonstrate its commitment to innovation and consumer satisfaction, delivering appliances that enhance daily life.