Whirlpool Guide to Converting Door Swing for Refrigerators
Page 6

Right-Hand Swing to Left-Hand Swing

If the door hinges were factory installed on the right-hand side of the refrigerator, follow these steps.

1.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes. See Graphic 7.

2.Remove door stop from both the freezer and refrigerator doors and place them on the opposite side. See Graphic 8.

3.On the bottom of the refrigerator door, move the wire/tube assembly so the connector points toward the opposite (bottom-hinge) side. See Graphic 2.

4.Locate the water dispenser wire/tube assembly behind the left-hand side of the bottom rail. Break the tape and pull the loose end out from the bottom rail. See Graphic 9.

5.Unscrew the hose clip from the right-hand side of the bottom rail and remove it. Replace the hose clip (with the tab pointing down) on the left-hand side wire/tube assembly. See Graphic 11.

IMPORTANT: Do not completely tighten the hose clip to the bottom rail at this time.

6.Connect the right-hand side dispenser wire/tube assembly to the connectors located near the right-hand side of the water filter. Push the connectors and wire/tube assembly behind the bottom rail. See Graphic 9.

7.Go to “Replace Doors and Hinges.”

Left-Hand Swing to Right-Hand Swing

If the refrigerator doors have already been reversed to left-hand swing and you wish to change back to a right-hand swing, follow these steps.

1.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes. See Graphic 7.

2.Remove door stop from both the freezer and refrigerator doors and place them on the opposite side. See Graphic 8.

3.On the bottom of the refrigerator door, move the wire/tube assembly so the connector points toward the opposite (bottom-hinge) side. See Graphic 2.

4.Push the left-hand side dispenser wire/tube assembly behind the bottom rail. It will not be reconnected. See Graphic 9.

5.Unscrew the hose clip from the left-hand side of the bottom rail and remove it. Replace the hose clip (with the tab pointing down) on the right-hand side wire/tube assembly. See Graphic 11.

IMPORTANT: Do not completely tighten the hose clip to the bottom rail at this time.

6.Disconnect the dispenser tubing and wiring plug from the connectors located near the right-hand side of the water filter. Push the wiring plug and connector tube behind the bottom rail. They will not be reconnected. The wire/tube assembly will reconnect later with the door. See Graphic 10.

7.Go to “Replace Doors and Hinges.”

Replace Doors and Hinges

NOTE: Graphics and steps may be reversed if the door swing is reversed.

1.Assemble the parts for the bottom hinge as shown. Tighten all screws. See Graphic 6.

2.Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

3.Remove the ⁵⁄₁₆" hex-head screw from the center rail. Loosen the two screws on the side just enough to replace the center hinge. Replace the center hinge and center rail screw. Tighten all screws. See Graphic 5.

4.Reconnect the wiring plug. See Graphic 3.

5.Reconnect the water dispenser tubing by pushing the tubing into the fitting until it stops and the black mark touches the face of the red outer ring. See Graphic 10.

6.Carefully push the wire/tube assembly into the clips on the bottom of the refrigerator door. See Graphic 2.

7.Replace the freezer door.

8.Assemble the parts for the top hinge as shown. Do not tighten completely. See Graphic 4.

9.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

10.Open the refrigerator door a full 120°. Locate the black electrical tape on the wire/tube assembly. Make sure the hose clip is covering the tape and tighten the hose clip completely. See Graphic 11.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Graphic 4.

2.If the door swing is reversed, remove the bottom hinge cover from the left-hand side of the base grille and replace it on the opposite side. Replace the base grille. See Graphic 1.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

3.Plug into a grounded 3 prong outlet.

4.Turn on the water supply to the refrigerator.

NOTE: Make sure the water dispenser tube connections, at the bottom of the refrigerator door, are fully tightened.

5.Flush the water system. See “Water Filtration System.”

6.If the dispenser light is not working, recheck the wiring plug connection.

7.Return all removable door parts to doors and food to refrigerator.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Refrigerator Safety Refrigerator User InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Remove the PackagingElectrical Requirements Clean Before UsingLocationRequirements Water Supply RequirementsReverse Osmosis Water Supply Connect the Water SupplyWater Pressure Connect to Water LineRemove Doors and Hinges Complete the InstallationRefrigerator Doors Reverse Doors optionalReplace Doors and Hinges Right-Hand Swing to Left-Hand SwingLeft-Hand Swing to Right-Hand Swing Final StepsDoor Swing Reversal optional Adjust the Doors Using theControlsRefrigerator USE Crisper Humidity Control Ice MakerWater Dispenser Water FiltrationSystem Refrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbsTroubleshooting Temperature and MoistureRefrigerator Operation Off-taste, odor or gray color in the ice Ice and WaterIce cubes are hollow or small Water is leaking from the dispenser systemReplacement Filter AccessoriesStainless Steel Cleaner & Polish Water Filter CertificationsProduct Data Sheets Application Guidelines/Water Supply ParametersModel WF-NLC120V Capacity 120 Gallons 454 Liters This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Retirer les matériaux d’emballageSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Pression de leauRaccordement de la canalisation deau Raccordement à la canalisation d’eauRaccordement au réfrigérateur Style Achever l’installation Portesdu réfrigérateurDémontage Portes et charnières Ouverture vers la droite à ouverture vers la gauche Réinstallation Portes et charnièresInversion des portes facultatif Ouverture vers la gauche à ouverture vers la droiteÉtapes finales Inversion du sens douverture des portes facultatif Utilisationdes commandes Utilisation DU RéfrigérateurAjustement des portes Mise en marche/arrêt de la machine à glaçons Machine à glaçonsDistributeur deau Taux de production des glaçonsVerrouillage du distributeur Dépose et réinstallation de la palette du distributeurDistribution deau Lumière du distributeur Pour verrouiller le distributeurSystème de filtration de leau Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur NettoyageDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eau’eau coule du système de distribution AccessoiresLe distributeur deau ne fonctionne pas correctement Leau du distributeur est tièdeFeuilles DE Données SUR LE Produit Système de filtration d’eau à la grille de la baseModèle WF-NLC120V Capacité 120 gallons 454 litres Articles Exclus DE LA Garantie Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10131410A SP PN W10131418A Whirlpool Corporation 10/07 All rights reserved

W10131410A, GR2SHWXPL02, GR2SHWXPQ02, GR2SHWXPS02 specifications

The Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A represent a range of innovative appliances designed to elevate the user experience in modern kitchens. These models blend cutting-edge technology with user-friendly features, making them an ideal choice for anyone seeking efficiency and convenience.

One of the standout features of these Whirlpool models is their spacious interiors, providing ample storage for groceries and meal prep items. Each variant is designed with adjustable shelves, allowing for flexible organization according to personal needs. This adaptability caters to various sizes of food items, such as tall bottles and large containers, ensuring users can maximize their storage potential.

In terms of technology, these refrigerators are equipped with advanced cooling systems that maintain optimal temperatures and humidity levels. This helps in preserving the freshness of food items for longer periods. The incorporation of LED lighting not only adds a modern aesthetic but also enhances visibility, ensuring users can easily locate items even in darker corners.

Energy efficiency is another critical aspect of these models. They are designed to consume less energy while still delivering top-notch performance. This eco-friendly feature not only reduces the carbon footprint but also leads to savings on utility bills, making it a smart investment for budget-conscious consumers.

The intuitive control panels offer simplicity and convenience, allowing users to adjust settings easily. Some models may even incorporate smart technology, enabling users to monitor and control their refrigerator remotely via smartphone applications. This feature provides added peace of mind and makes it easier to manage food inventory, even while away from home.

When it comes to design, the Whirlpool GR2 series stands out with its sleek and modern appearance, available in various finishes that complement any kitchen décor. The stainless steel options not only add sophistication but are also resistant to fingerprints, ensuring that the appliance continues to look sleek with minimal maintenance.

In summary, the Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A offer a blend of spacious storage, advanced cooling technologies, energy efficiency, and modern design. These features make them an excellent choice for individuals and families navigating the demands of contemporary living, setting a high standard for kitchen appliances. With this range, Whirlpool continues to demonstrate its commitment to innovation and consumer satisfaction, delivering appliances that enhance daily life.
Top Page Image Contents