Whirlpool W10314956B Temperature and Moisture, Ice and Water, Temperature is too warm

Page 14

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

Temperature is too cold in refrigerator

■Refrigerator air vent blocked? If the air vent located in the top, left, rear corner of the refrigerator compartment is blocked by items placed directly in front of it, the refrigerator will get too cold. Move items away from the air vent.

■Ice storage bin in correct position? See “Ice Maker and Ice Storage Bin.”

■Controls set correctly for the surrounding conditions? Adjust the controls a setting warmer. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure ice maker is on. See “Ice Maker and Ice Storage Bin.”

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method LocationRequirementsElectrical Requirements Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededRemove and Replace Handles To Remove Handles Refrigerator Doors and DrawerConnect to Refrigerator To Replace HandlesReplace Doors and Hinges Remove Drawer FrontReplace Drawer Front Remove and Replace Freezer DrawerBottom Hinges Refrigerator USE Adjust the DoorsUsing theControls Opening and Closing DoorsAdditional Features Adjusting the ControlsCondition Temperature Adjustment Fast CoolCrisper Humidity Control Door Ajar AlarmWater Filter Status Light and Filter Reset Ice Maker and Ice Storage BinTo Dispense Ice Water Filter StatusLightTo Dispense Water Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb To Replace an Appliance BulbIce and Water Temperature and MoistureTemperature is too warm Water Filter Certifications Water and ice dispenser will not operate properlyPerformance Data Sheet Application Guidelines/Water Supply ParametersThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions D’INSTALLATIONExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurDépose de la façade du tiroir Réinstallation de la façade du tiroirPortes et tiroir duréfrigérateur Charnières inférieures Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur Ouverture et fermeture des portesCondition Ajustement DE LA Température Ajustement des commandesFast Cool glace rapides Refroidissement On/Off marche/arrêtMachine à glaçons et bac d’entreposage Alarme de porte entrouverteTémoin lumineux du filtre à eau et réinstallation du filtre Distribution de glace Distributeurs d’eau et de glaçonsDistribution d’eau RemarquesSystème defiltrationde leau Entretien DU RéfrigérateurTémoin lumineux de l’état dufiltre à eau NettoyageRemplacement del’ampoule d’éclairage Le réfrigérateur ne fonctionne pas DépannageFonctionnement duréfrigérateur Le moteur semble trop tournerLes portes sont difficiles à ouvrir Température et humiditéGlaçons et eau Remplacer le filtre ou le réinstaller correctement Feuille DE Données SUR LA Performance Système de filtration d’eau intérieurÉléments Exclus DE LA Garantie Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasPage Page Page Page Page W10314956B SP PN W10314957B Whirlpool Corporation All rights reserved

W10314956B specifications

The Whirlpool W10314956B is a highly regarded microwave hood combination that offers a blend of modern convenience and essential cooking features. Designed to fit seamlessly into contemporary kitchens, this appliance functions as both a microwave and a range hood, making it an ideal choice for multitasking and saving space.

One of the standout features of the Whirlpool W10314956B is its powerful ventilation system. With a fan capable of reaching up to 400 CFM, it efficiently removes smoke, steam, and odors from your kitchen during cooking. This is further enhanced by its two speed settings, allowing users to select the appropriate fan speed based on their cooking needs. The grease filter is dishwasher safe, ensuring easy maintenance and optimal performance over time.

In terms of microwave functionality, the W10314956B boasts a spacious interior that accommodates a variety of plate sizes and cooking containers. With a generous microwave power of 1,800 watts, it delivers quick and even heating. The microwave features multiple cooking options, including one-touch settings for popcorn, baked potatoes, and other popular food items. The sensor cooking technology takes the guesswork out of food preparation by automatically adjusting cooking time based on humidity levels, ensuring perfectly cooked meals every time.

The appliance is also equipped with a sleek digital control panel that is user-friendly and intuitive. The bright LED lighting illuminates the cooktop area, enhancing visibility while cooking. This is especially beneficial for late-night meals or when working with intricate recipes that require precision.

Another notable characteristic of the Whirlpool W10314956B is its aesthetic design, which complements a variety of kitchen decors. Its stainless steel finish is not only stylish but also resistant to fingerprints and smudges, ensuring that your kitchen looks clean and polished at all times. Additionally, the compact design allows it to fit under cabinets without taking up excessive space, making it a practical solution for smaller kitchens.

Overall, the Whirlpool W10314956B is a versatile and efficient kitchen appliance that combines the functionality of a microwave with the benefits of a range hood. With its powerful performance, user-friendly features, and sleek design, it is an excellent choice for homeowners looking to optimize their cooking experiences. Whether you are reheating leftovers or cooking a gourmet meal, this microwave hood combination offers the reliability and performance that modern kitchens demand.
Top Page Image Contents