Whirlpool W10314956B Fast Cool, Adjusting the Controls, Condition Temperature Adjustment

Page 9

Adjusting the Controls

For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still set to the “mid-settings.” The factory recommended set points are 38°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.

IMPORTANT:

■Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the set points to a colder than recommended setting will not cool the compartments any faster.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

■The preset temperatures should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

To view and adjust the set points, press and hold the TEMP button for 3 seconds. When adjust mode is activated, adjusting information will appear on the display screen.

NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated. To return the display setting to Fahrenheit, press LIGHT again.

■When adjust mode is activated, the display screen shows the refrigerator set point and “FRIDGE” appears.

■Press LOCK to raise the set point, or press FAST COOL to lower the set point.

■When you have finished viewing (and adjusting if desired) the refrigerator set point, press TEMP to change the display to show the freezer set point. When the zone has been changed, “FREEZER” appears on the display screen.

■Press LOCK to raise the set point, or press FAST COOL to lower the set point.

■When you have finished viewing (and adjusting if desired) both the refrigerator and freezer set points, press FILTER to save the settings.

NOTE: To exit without saving changes, press ICE TYPE at any time while in adjust mode, or allow about 60 seconds of inactivity and adjust mode will turn off automatically.

When adjusting temperature set points, use the following chart as a guide.

CONDITION:

TEMPERATURE

 

ADJUSTMENT:

 

 

REFRIGERATOR too cold

REFRIGERATOR Setting

 

1° higher

 

 

REFRIGERATOR too warm

REFRIGERATOR Setting

 

1° lower

 

 

FREEZER too cold

FREEZER Setting

 

1° higher

 

 

FREEZER too warm /

FREEZER Setting

Too little ice

1° lower

 

 

The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is turned off.

■To turn cooling off, press and hold the LOCK and FILTER buttons at the same time for 3 seconds. When cooling is off, “COOLING OFF” will appear on the display screen.

IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time.

A

A. Press Lock and Filter Reset at the same time.

■Press and hold LOCK and FILTER for 3 seconds again to turn cooling back on.

Additional Features

Fast Cool

The Fast Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.

■Press FAST COOL to set the freezer and refrigerator to the lowest temperature setting. When the feature is on, the Fast Cool icon will appear on the dispenser display screen. The Fast Cool feature will remain on for 24 hours unless manually turned off.

■To manually turn off the Fast Cool feature, press FAST COOL again or adjust the refrigerator temperature set point. The Fast Cool icon will disappear when the feature is off.

NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerLocationRequirements Electrical RequirementsRecommended Grounding Method Connect the Water Supply Water Supply RequirementsReverse Osmosis Water Supply Tools NeededConnect to Refrigerator Refrigerator Doors and DrawerRemove and Replace Handles To Remove Handles To Replace HandlesReplace Drawer Front Remove Drawer FrontReplace Doors and Hinges Remove and Replace Freezer DrawerBottom Hinges Using theControls Adjust the DoorsRefrigerator USE Opening and Closing DoorsCondition Temperature Adjustment Adjusting the ControlsAdditional Features Fast CoolWater Filter Status Light and Filter Reset Door Ajar AlarmCrisper Humidity Control Ice Maker and Ice Storage BinWater Filter StatusLight To Dispense WaterTo Dispense Ice Cleaning Refrigerator CareWater Filtration System Changing the Light Bulb TroubleshootingRefrigerator Operation To Replace an Appliance BulbTemperature and Moisture Temperature is too warmIce and Water Water and ice dispenser will not operate properly Water Filter CertificationsApplication Guidelines/Water Supply Parameters Performance Data SheetItems Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesRéfrigérateur Sécurité DU RéfrigérateurExigences demplacement Instructions D’INSTALLATIONDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécificationsélectriques Méthode recommandée de mise à la terreSpécifications del’alimentationen eau Alimentation en eau par osmose inverseRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurRéinstallation de la façade du tiroir Portes et tiroir duréfrigérateurDépose de la façade du tiroir Charnières inférieures Utilisation DU Réfrigérateur Utilisation des commandesAjustement desportes Ouverture et fermeture des portesFast Cool glace rapides Ajustement des commandesCondition Ajustement DE LA Température Refroidissement On/Off marche/arrêtAlarme de porte entrouverte Témoin lumineux du filtre à eau et réinstallation du filtreMachine à glaçons et bac d’entreposage Distribution d’eau Distributeurs d’eau et de glaçonsDistribution de glace RemarquesTémoin lumineux de l’état dufiltre à eau Entretien DU RéfrigérateurSystème defiltrationde leau NettoyageRemplacement del’ampoule d’éclairage Fonctionnement duréfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerTempérature et humidité Glaçons et eauLes portes sont difficiles à ouvrir Remplacer le filtre ou le réinstaller correctement Système de filtration d’eau intérieur Feuille DE Données SUR LA PerformanceGarantie Limitée Garantie DE Gros Appareil Ménager Whirlpool CorporationÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Page Page Page Page Whirlpool Corporation All rights reserved W10314956B SP PN W10314957B

W10314956B specifications

The Whirlpool W10314956B is a highly regarded microwave hood combination that offers a blend of modern convenience and essential cooking features. Designed to fit seamlessly into contemporary kitchens, this appliance functions as both a microwave and a range hood, making it an ideal choice for multitasking and saving space.

One of the standout features of the Whirlpool W10314956B is its powerful ventilation system. With a fan capable of reaching up to 400 CFM, it efficiently removes smoke, steam, and odors from your kitchen during cooking. This is further enhanced by its two speed settings, allowing users to select the appropriate fan speed based on their cooking needs. The grease filter is dishwasher safe, ensuring easy maintenance and optimal performance over time.

In terms of microwave functionality, the W10314956B boasts a spacious interior that accommodates a variety of plate sizes and cooking containers. With a generous microwave power of 1,800 watts, it delivers quick and even heating. The microwave features multiple cooking options, including one-touch settings for popcorn, baked potatoes, and other popular food items. The sensor cooking technology takes the guesswork out of food preparation by automatically adjusting cooking time based on humidity levels, ensuring perfectly cooked meals every time.

The appliance is also equipped with a sleek digital control panel that is user-friendly and intuitive. The bright LED lighting illuminates the cooktop area, enhancing visibility while cooking. This is especially beneficial for late-night meals or when working with intricate recipes that require precision.

Another notable characteristic of the Whirlpool W10314956B is its aesthetic design, which complements a variety of kitchen decors. Its stainless steel finish is not only stylish but also resistant to fingerprints and smudges, ensuring that your kitchen looks clean and polished at all times. Additionally, the compact design allows it to fit under cabinets without taking up excessive space, making it a practical solution for smaller kitchens.

Overall, the Whirlpool W10314956B is a versatile and efficient kitchen appliance that combines the functionality of a microwave with the benefits of a range hood. With its powerful performance, user-friendly features, and sleek design, it is an excellent choice for homeowners looking to optimize their cooking experiences. Whether you are reheating leftovers or cooking a gourmet meal, this microwave hood combination offers the reliability and performance that modern kitchens demand.
Top Page Image Contents