Whirlpool W10314956B Crisper Humidity Control, Ice Maker and Ice Storage Bin, Door Ajar Alarm

Page 10

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the refrigerator or freezer door is open for 5 minutes and the product cooling is turned on. The alarm will repeat every 2 minutes. Close both doors to turn it off. The feature then resets and will reactivate when either door is left open again for 5 minutes.

NOTE: To mute the audible alarm while keeping the doors open, such as while cleaning the inside of the refrigerator, press any button on the control panel. The alarm sound will be temporarily turned off, but the Door Ajar icon will still be displayed on the dispenser control panel.

Water Filter Status Light and Filter Reset

The filter reset control allows you to restart the water filter status tracking feature each time you replace the water filter. See “Water Filtration System.”

■Press and hold FILTER RESET for 3 seconds, until the “Replace Filter” light turns off.

Crisper Humidity Control

You can control the amount of humidity in the moisture-sealed crisper. Depending on your model, adjust the control to any setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT/LOW (open) for best storage of fruits and vegetables with skins.

VEGETABLES/HIGH (closed) for best storage of fresh, leafy vegetables.

Ice Maker and Ice Storage Bin

IMPORTANT:

■Flush the water system before turning on the ice maker. See “Water and Ice Dispensers.”

■The ice maker and storage bin are located in the upper left- hand side of the refrigerator compartment.

Turning the Ice Maker On/Off

The ice maker has an automatic shutoff. When the ice maker is on, sensors will automatically stop ice production when the storage bin is full. The ice maker will remain set to ON, and ice production will resume when the bin is no longer full.

To manually turn off the ice maker, press TEMP and FAST COOL at the same time and hold for 3 seconds until the “Ice Maker Off” icon lights up. When the ice maker is set to OFF, it will stop producing ice.

Pressing and holding TEMP and FAST COOL again for 3 seconds turns on the ice maker and the “Ice Maker Off” icon disappears.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1.Hold the base of the storage bin and press the release button.

2.Pull out the storage bin.

To Replace the Ice Storage Bin:

IMPORTANT: It may be necessary to turn the auger driver, behind the ice bin, counterclockwise to properly align the ice bin with the auger driver. The ice storage bin must be locked in place for proper ice dispensing.

1.Slide the ice bin into the guide rails located on either side of the enclosure.

2.Push the ice bin in until resistance is felt. Raise the front slightly and push the ice bin in until an audible “click” is heard.

A

A. Auger driver

Ice Production Rate

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder.

Remember

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice bin and dispenser mechanism.

■Do not store anything in the ice storage bin.

Water and Ice Dispensers

IMPORTANT: After connecting the refrigerator to a water source or replacing the water filter, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for

5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) until a total of 4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTES:

■The dispensing system will not operate when the refrigerator door is open.

■Allow 24 hours for the refrigerator to cool down and chill water.

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The display screen on the dispenser control panel will turn off automatically and enter “sleep” mode when the control buttons and dispenser levers have not been used for

2 minutes or more. While in “sleep” mode, the first press of a control button will only reactivate the display screen, without changing any settings. After reactivation, changes to any settings can then be made. If no changes are made within 2 minutes, the display will re-enter “sleep” mode.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededRemove and Replace Handles To Remove Handles Refrigerator Doors and DrawerConnect to Refrigerator To Replace HandlesReplace Doors and Hinges Remove Drawer FrontReplace Drawer Front Remove and Replace Freezer DrawerBottom Hinges Refrigerator USE Adjust the DoorsUsing theControls Opening and Closing DoorsAdditional Features Adjusting the ControlsCondition Temperature Adjustment Fast CoolCrisper Humidity Control Door Ajar AlarmWater Filter Status Light and Filter Reset Ice Maker and Ice Storage BinTo Dispense Water Water Filter StatusLightTo Dispense Ice Refrigerator Care CleaningWater Filtration System Refrigerator Operation TroubleshootingChanging the Light Bulb To Replace an Appliance BulbTemperature is too warm Temperature and MoistureIce and Water Water Filter Certifications Water and ice dispenser will not operate properlyPerformance Data Sheet Application Guidelines/Water Supply ParametersThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions D’INSTALLATIONExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurPortes et tiroir duréfrigérateur Réinstallation de la façade du tiroirDépose de la façade du tiroir Charnières inférieures Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur Ouverture et fermeture des portesCondition Ajustement DE LA Température Ajustement des commandesFast Cool glace rapides Refroidissement On/Off marche/arrêtTémoin lumineux du filtre à eau et réinstallation du filtre Alarme de porte entrouverteMachine à glaçons et bac d’entreposage Distribution de glace Distributeurs d’eau et de glaçonsDistribution d’eau RemarquesSystème defiltrationde leau Entretien DU RéfrigérateurTémoin lumineux de l’état dufiltre à eau NettoyageRemplacement del’ampoule d’éclairage Le réfrigérateur ne fonctionne pas DépannageFonctionnement duréfrigérateur Le moteur semble trop tournerGlaçons et eau Température et humiditéLes portes sont difficiles à ouvrir Remplacer le filtre ou le réinstaller correctement Feuille DE Données SUR LA Performance Système de filtration d’eau intérieurÉléments Exclus DE LA Garantie Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasPage Page Page Page Page W10314956B SP PN W10314957B Whirlpool Corporation All rights reserved

W10314956B specifications

The Whirlpool W10314956B is a highly regarded microwave hood combination that offers a blend of modern convenience and essential cooking features. Designed to fit seamlessly into contemporary kitchens, this appliance functions as both a microwave and a range hood, making it an ideal choice for multitasking and saving space.

One of the standout features of the Whirlpool W10314956B is its powerful ventilation system. With a fan capable of reaching up to 400 CFM, it efficiently removes smoke, steam, and odors from your kitchen during cooking. This is further enhanced by its two speed settings, allowing users to select the appropriate fan speed based on their cooking needs. The grease filter is dishwasher safe, ensuring easy maintenance and optimal performance over time.

In terms of microwave functionality, the W10314956B boasts a spacious interior that accommodates a variety of plate sizes and cooking containers. With a generous microwave power of 1,800 watts, it delivers quick and even heating. The microwave features multiple cooking options, including one-touch settings for popcorn, baked potatoes, and other popular food items. The sensor cooking technology takes the guesswork out of food preparation by automatically adjusting cooking time based on humidity levels, ensuring perfectly cooked meals every time.

The appliance is also equipped with a sleek digital control panel that is user-friendly and intuitive. The bright LED lighting illuminates the cooktop area, enhancing visibility while cooking. This is especially beneficial for late-night meals or when working with intricate recipes that require precision.

Another notable characteristic of the Whirlpool W10314956B is its aesthetic design, which complements a variety of kitchen decors. Its stainless steel finish is not only stylish but also resistant to fingerprints and smudges, ensuring that your kitchen looks clean and polished at all times. Additionally, the compact design allows it to fit under cabinets without taking up excessive space, making it a practical solution for smaller kitchens.

Overall, the Whirlpool W10314956B is a versatile and efficient kitchen appliance that combines the functionality of a microwave with the benefits of a range hood. With its powerful performance, user-friendly features, and sleek design, it is an excellent choice for homeowners looking to optimize their cooking experiences. Whether you are reheating leftovers or cooking a gourmet meal, this microwave hood combination offers the reliability and performance that modern kitchens demand.
Top Page Image Contents