Whirlpool W10214130A Temperature and Moisture, Ice and Water, Door will not close completely

Page 12

■Popping - contraction/expansion of inside walls, especially during initial cool-down.

■Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.

The door will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

■Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Clean Before Using LocationRequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyStyle Refrigerator Doors Style 1 StandardRemove Doors and Hinges Reverse Doors optionalStyle 2 Contoured Door Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Adjust the Doors Using theControlsMid-setting Adjusting ControlsCleaning To Clean Your RefrigeratorRefrigerator Care Ice MakerTroubleshooting Changing theLight BulbsRefrigerator Operation Temperature and Moisture Temperature is too warmIce and Water Door will not close completelyWhirlpool Corporation Major Appliance Warranty This limited warranty does not coverSécurité DU Réfrigérateur RéfrigérateurInstructions D’INSTALLATION Déballage duréfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Nettoyage avant l’utilisationExigences d’emplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications del’alimentationen eauRaccordement de la canalisation d’eau Alimentation en eau par osmose inversePression de leau Raccordement à une canalisation d’eauAchever l’installation Portes duréfrigérateurDémontage Portes et charnières Inversion des portes facultatifStyle 2 Contour Inversion du sens douverture de la porte option Style 2 Contour Utilisation des commandes Utilisation DU RéfrigérateurAjustement desportes Réglage moyenAjustement des réglages de commande Machine à glaçonsMise en marche/arrêt de la machine à glaçons Taux de production de glaçonsRemplacement des ampoules d’éclairage Entretien DU RéfrigérateurNettoyage Pour nettoyer le réfrigérateurDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauIl y a une accumulation dhumidité à lintérieur Garantie DE Gros Appareil Ménager Whirlpool Corporation La présente garantie limitée ne couvre pasW10214130A SP PN W10214256A Whirlpool Corporation All rights reserved

W10214130A specifications

The Whirlpool W10214130A is a highly efficient appliance designed to enhance the functionality of modern kitchens. This versatile kitchen appliance embodies the brand’s commitment to quality and innovation, making it a staple in many households. One of the standout features of the W10214130A is its advanced technology aimed at improving user experience and maximizing convenience.

First and foremost, this model is equipped with a powerful motor that ensures fast and efficient operation, reducing preparation time for various tasks. Whether you are blending, mixing, or kneading, the robust motor provides consistent performance across different settings. The appliance also boasts multiple speed settings, allowing users to customize the intensity for precise results according to the specific task at hand.

Another notable characteristic of the W10214130A is its durability. The appliance is constructed with high-quality materials that are resistant to wear and tear, ensuring longevity and reliable service. The stainless steel components not only enhance the durability but also add an element of sleekness and modernity to the kitchen aesthetic.

Ease of cleaning is a major consideration in kitchen appliances, and the W10214130A excels in this area as well. Many parts of the appliance can be disassembled and are dishwasher safe, making post-use cleanup a breeze.

Moreover, the design of this appliance emphasizes safety and user-friendliness. It includes a secure locking mechanism that ensures safety during operation, especially when dealing with high speeds. This feature is particularly important for families with children, providing peace of mind while using the appliance in a bustling kitchen environment.

The Whirlpool W10214130A also prioritizes energy efficiency, which aligns with contemporary sustainability practices. By consuming low energy while still delivering powerful performance, it helps reduce electricity bills and minimize environmental impact.

In summary, the Whirlpool W10214130A is a blend of innovative technology, durable design, and user-friendly features. Its combination of versatility, safety, and energy efficiency makes it an excellent addition to any modern kitchen, catering to the needs of home cooks and professional chefs alike.
Top Page Image Contents