Whirlpool W10214130A Refrigerator Doors, Style 1 Standard, Remove Doors and Hinges, Cabinet

Page 5

4.Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet.

A

B

C

A. Tube clamp

C. Compression nut

B. Copper tubing

 

5.Turn shutoff valve ON. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power.

■Remove food and adjustable door or utility bins from doors.

■If you are only removing and replacing the doors, see the “Remove Doors and Hinges” and “Replace Doors and Hinges” sections.

■Depending on your model, you may have standard (Style 1) or contoured (Style 2) doors. If you are also going to reverse the door swing, follow the instructions for the appropriate door style.

Remove Doors and Hinges

⁵⁄₁₆" Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

4.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

5.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Style 1 - Standard

Graphics follow these instructions.

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Door Handle Screw Cover

Door Handle Seal Screw Front

Round-Head Handle Screw

Cabinet

1.Remove ⁵⁄₁₆" hex-head hinge screws from handle side and move them to opposite side. See Graphic 1-1.

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown. See Graphic 1-2.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator LocationRequirements Clean Before UsingElectrical Requirements Water Supply RequirementsStyle Connect the Water SupplyReverse Osmosis Water Supply Style 1 Standard Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalStyle 2 Contoured Door Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Using theControls Adjust the DoorsMid-setting Adjusting ControlsTo Clean Your Refrigerator CleaningRefrigerator Care Ice MakerRefrigerator Operation TroubleshootingChanging theLight Bulbs Temperature is too warm Temperature and MoistureIce and Water Door will not close completelyThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantyRéfrigérateur Sécurité DU RéfrigérateurDéballage duréfrigérateur Instructions D’INSTALLATIONAvant de jeter votre vieux réfrigérateur ou congélateur Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Spécifications del’alimentationen eauAlimentation en eau par osmose inverse Raccordement de la canalisation d’eauPression de leau Raccordement à une canalisation d’eauPortes duréfrigérateur Achever l’installationDémontage Portes et charnières Inversion des portes facultatifStyle 2 Contour Inversion du sens douverture de la porte option Style 2 Contour Utilisation DU Réfrigérateur Utilisation des commandesAjustement desportes Réglage moyenMachine à glaçons Ajustement des réglages de commandeMise en marche/arrêt de la machine à glaçons Taux de production de glaçonsEntretien DU Réfrigérateur Remplacement des ampoules d’éclairageNettoyage Pour nettoyer le réfrigérateurFonctionnement du réfrigérateur DépannageIl y a une accumulation dhumidité à lintérieur Température et humiditéGlaçons et eau La présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager Whirlpool CorporationWhirlpool Corporation All rights reserved W10214130A SP PN W10214256A

W10214130A specifications

The Whirlpool W10214130A is a highly efficient appliance designed to enhance the functionality of modern kitchens. This versatile kitchen appliance embodies the brand’s commitment to quality and innovation, making it a staple in many households. One of the standout features of the W10214130A is its advanced technology aimed at improving user experience and maximizing convenience.

First and foremost, this model is equipped with a powerful motor that ensures fast and efficient operation, reducing preparation time for various tasks. Whether you are blending, mixing, or kneading, the robust motor provides consistent performance across different settings. The appliance also boasts multiple speed settings, allowing users to customize the intensity for precise results according to the specific task at hand.

Another notable characteristic of the W10214130A is its durability. The appliance is constructed with high-quality materials that are resistant to wear and tear, ensuring longevity and reliable service. The stainless steel components not only enhance the durability but also add an element of sleekness and modernity to the kitchen aesthetic.

Ease of cleaning is a major consideration in kitchen appliances, and the W10214130A excels in this area as well. Many parts of the appliance can be disassembled and are dishwasher safe, making post-use cleanup a breeze.

Moreover, the design of this appliance emphasizes safety and user-friendliness. It includes a secure locking mechanism that ensures safety during operation, especially when dealing with high speeds. This feature is particularly important for families with children, providing peace of mind while using the appliance in a bustling kitchen environment.

The Whirlpool W10214130A also prioritizes energy efficiency, which aligns with contemporary sustainability practices. By consuming low energy while still delivering powerful performance, it helps reduce electricity bills and minimize environmental impact.

In summary, the Whirlpool W10214130A is a blend of innovative technology, durable design, and user-friendly features. Its combination of versatility, safety, and energy efficiency makes it an excellent addition to any modern kitchen, catering to the needs of home cooks and professional chefs alike.
Top Page Image Contents