Whirlpool W10214130A Troubleshooting, Changing theLight Bulbs, Refrigerator Operation

Page 11

4.Clean the condenser coils regularly. Coils may need to be cleaned as often as every other month. This may help save energy.

■Pull refrigerator out away from the wall. See “Unpack the Refrigerator.”

■Vacuum coils when they are dusty or dirty.

■Roll refrigerator back into place. Make sure to leave 1" (2.5 cm) between the cabinet back and the wall.

■Check to see that the refrigerator is level.

5.Plug in refrigerator or reconnect power.

Changing theLight Bulbs

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.

Refrigerator Light

1.Unplug refrigerator or disconnect power.

2.Reach behind the control panel and unscrew the bulb.

3.Replace the bulb with a 40-watt appliance bulb.

4.Plug in refrigerator or reconnect power.

Freezer Light

1.Unplug refrigerator or disconnect power.

2.Remove the freezer shelf.

3.Remove the freezer light shield by pushing down.

4.Remove the light bulb and replace with one of the same size, shape and wattage.

5.Replace the light shield.

6.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■Pulsating - fans/compressor adjusting to optimize performance.

■Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Water Supply Requirements Clean Before UsingLocationRequirements Electrical RequirementsStyle Connect the Water SupplyReverse Osmosis Water Supply Reverse Doors optional Refrigerator DoorsStyle 1 Standard Remove Doors and HingesStyle 2 Contoured Door Removal Replacement Door Swing Reversal optional Door Swing Reversal optional Adjusting Controls Adjust the DoorsUsing theControls Mid-settingIce Maker CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingChanging theLight Bulbs Door will not close completely Temperature and MoistureTemperature is too warm Ice and WaterThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantyRéfrigérateur Sécurité DU RéfrigérateurNettoyage avant l’utilisation Instructions D’INSTALLATIONDéballage duréfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Exigences d’emplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation d’eauAlimentation en eau par osmose inverse Pression de leauInversion des portes facultatif Achever l’installationPortes duréfrigérateur Démontage Portes et charnièresStyle 2 Contour Inversion du sens douverture de la porte option Style 2 Contour Réglage moyen Utilisation des commandesUtilisation DU Réfrigérateur Ajustement desportesTaux de production de glaçons Ajustement des réglages de commandeMachine à glaçons Mise en marche/arrêt de la machine à glaçonsPour nettoyer le réfrigérateur Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur NettoyageFonctionnement du réfrigérateur DépannageIl y a une accumulation dhumidité à lintérieur Température et humiditéGlaçons et eau La présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager Whirlpool CorporationWhirlpool Corporation All rights reserved W10214130A SP PN W10214256A

W10214130A specifications

The Whirlpool W10214130A is a highly efficient appliance designed to enhance the functionality of modern kitchens. This versatile kitchen appliance embodies the brand’s commitment to quality and innovation, making it a staple in many households. One of the standout features of the W10214130A is its advanced technology aimed at improving user experience and maximizing convenience.

First and foremost, this model is equipped with a powerful motor that ensures fast and efficient operation, reducing preparation time for various tasks. Whether you are blending, mixing, or kneading, the robust motor provides consistent performance across different settings. The appliance also boasts multiple speed settings, allowing users to customize the intensity for precise results according to the specific task at hand.

Another notable characteristic of the W10214130A is its durability. The appliance is constructed with high-quality materials that are resistant to wear and tear, ensuring longevity and reliable service. The stainless steel components not only enhance the durability but also add an element of sleekness and modernity to the kitchen aesthetic.

Ease of cleaning is a major consideration in kitchen appliances, and the W10214130A excels in this area as well. Many parts of the appliance can be disassembled and are dishwasher safe, making post-use cleanup a breeze.

Moreover, the design of this appliance emphasizes safety and user-friendliness. It includes a secure locking mechanism that ensures safety during operation, especially when dealing with high speeds. This feature is particularly important for families with children, providing peace of mind while using the appliance in a bustling kitchen environment.

The Whirlpool W10214130A also prioritizes energy efficiency, which aligns with contemporary sustainability practices. By consuming low energy while still delivering powerful performance, it helps reduce electricity bills and minimize environmental impact.

In summary, the Whirlpool W10214130A is a blend of innovative technology, durable design, and user-friendly features. Its combination of versatility, safety, and energy efficiency makes it an excellent addition to any modern kitchen, catering to the needs of home cooks and professional chefs alike.
Top Page Image Contents