To reinstall shelf:
1.Hold shelf at front and back.
2.Tilt front of shelf up to a 45” angle to track.
3.Insert both rear shelf slides into upper channel of track.
4.Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.
Upper channel
insert rear shelf slides into upper channel of track.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk, and other heavy food items.
To remove a shelf:
1.Remove items from shelf.
2.Tilt shelf up at front.
3.Lift shelf at back.
4.Pull shelf straight out.
To replace a shelf:
1.Guide the rear shelf hooks into the slots in the shelf supports on the back liner wall.
2.Tilt front of shelf up until hooks drop into slots.
3.Lower front of shelf to a level position.
To slide shelf out:
lCarefully pull front of shelf toward you.
To slide shelf in:
lPush shelf in until it stops.
NOTE: Glass shelves are heavy. Handle them carefully.
Removing the meat drawer
To remove the meat drawer:
1.Slide meat drawer out to the stop.
2.Lift front of meat drawer and slide meat drawer out the rest of the way.
3.Replace in reverse order.
To adjust the cover position:
1.Tilt front of cover up.
2.Lift back of cover.
3.Pull cover straight out.
To replace the cover:
1.Guide the cover’s rear hooks into the slots in the shelf supports on cabinet wall.
2.Tilt cover up at front until the hooks drop into slots.
3.Lower front of cover to a level position
and cover
Pull out to the stop, lift the front, and pull again.
9