CYCLE GUIDE — MANUAL CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
Use a no heat (air dry) setting for foam, rubber, plastic, or
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
| Cycle: | Drying | Default | Available |
|
Items to dry: | Temperature: | Time: | Options: | Cycle Details: | |
|
|
|
|
|
|
Small loads and | Quick Dry | High | 13 | Wrinkle Shield™† | For small loads of |
sportswear |
| Medium |
|
|
|
|
| Low |
|
|
|
|
| Extra Low |
|
|
|
|
| Air Only |
|
|
|
Any load | Timed Dry | High | (the last | Wrinkle Shield™† | Use to dry items to a damp level for items that do |
NOTE: Select Air |
| Medium | timed dry |
| not require an entire drying cycle. Select a drying |
Only to dry foam, |
| Low | time set) |
| temperature based on the type of fabrics in your |
rubber, plastic, or |
| Extra Low |
|
| load. If you are unsure of the temperature to select |
| Air Only |
|
| for a load, select the lower setting rather than the | |
fabrics. |
|
|
|
| higher setting. |
|
|
|
|
|
|
†On some models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.
CYCLE GUIDE — STEAM CYCLE (on some models)
Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Items to | Cycle: | Drying | Default | Available |
|
refresh: | Temperature: | Time: | Options: | Cycle Details: | |
Shirts, blouses, | Steam Refresh | High | 22 | Wrinkle Shield™† | Use to reduce odors and light wrinkles. |
and slacks |
| Medium |
|
| Do not add dryer sheets. |
|
|
|
|
|
|
†You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the dryer drum with
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full. Do not pack tightly. Items need to tumble freely.
9