Whirlpool W10435039A Electrical Shock Hazard Electrically ground dishwasher

Page 13

Electrical Shock Hazard

Select UL Listed/CSA Approved twist-on wire connectors rated to connect your power supply cord to 16-gauge dishwasher wiring.

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Remove the green grounding screw and place through the ring terminal of the green ground wire. Reattach and tighten the green screw.

NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured.

Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors.

If needed, see website for animated representation of this step. Visit www.whirlpool.com/electrical under FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹₄ " nut driver or Torx® T20® screwdriver and previously removed screw to secure cover.

NOTE: Do not plug into outlet until instructed to do so.

13

Image 13

Contents PLASTIC GIANT TUB MODELS INSTRUCTIONS DINSTALLATION INSTALLATION INSTRUCTIONS UNDERCOUNTER DISHWASHERLAVE-VAISSELLE SOUS COMPTOIR MODÈLES À TRÈS GRANDE CUVE EN PLASTIQUE W10435039ADISHWASHER SAFETY TABLE OF CONTENTSYou Need to Tip Over HazardAll Installations INSTALLATION REQUIREMENTSIn addition, for first-time installations Tools and PartsLocation Requirements Page If connecting dishwasher with direct wiring If connecting dishwasher with a power supply cordDrain Requirements Water Supply RequirementsOption A, Power Supply Cord INSTALLATION INSTRUCTIONSPrepare Cabinet Opening-Existing Utilities Prepare Cabinet Opening-New UtilitiesPrepare and Route Water Line Option B, Direct WireInstall Drain Hose Option B, No waste disposer - no air gap Option A, Waste disposer - no air gapOption C, Waste disposer - with air gap Use two or more people to move and install dishwasher Excessive Weight HazardPrepare Dishwasher Option D, No waste disposer - with air gapMake Power Supply Cord Connection Electrical Shock Hazard Electrically ground dishwasher Connect ground wire to green ground connector in terminal boxDo not use an extension cord Determine Cabinet Opening Prepare Water Supply Line Choose Attachment OptionOption 1, Countertop Attachment Option 2, Side AttachmentMove Dishwasher Close to Cabinet Opening NOTE Springs should be in the same notches on left and right sides Connect to Drain Connect to Water SupplyMake Direct Wire Electrical Connection Secure Dishwasher in Cabinet Opening Side mount dishwasher to cabinet Secure dishwasher to countertopReconnect Power Complete InstallationElectrical Shock Hazard Plug into a grounded 3 prong outlet Do not remove ground prong Do not use an adapterIf Dishwasher Does Not Operate Check OperationAdditional Tips