Installation and Operation
4.0 Operation
The XLogic E Signature Channel unit is a 1U rack mounting unit containing a complete set of signal processing based upon the SL 4000 E Series channel strip – Input, Compressor/Limiter, Expander/Gate, Hi and Lo pass Filters and Equaliser.
The signal processing order can be changed and the EQ and Filter sections used in the Dynamics side chain. providing a wide range of signal processing options.
Obviously there are many different permutations of signal routing, allowing an enormous number of creative possibilities. This section looks at each control on the XLogic E Signature Channel individually, working from left to right, with a brief summary of the routing possibilities. See Section 5 for more on routing.
4.1Input Section
The Input section contains two completely independent Mic amps together with an electronically balanced Line input with its own gain control. The primary Mic amp is a classic transformer coupled design using the same Jensen component as the original E Series channel strips. The second option is engaged via the ON switch. This replaces the original preamp with a new electronically balanced design with SSL's unique variable harmonic drive circuitry. This unique preamp emulates the overload characteristics of a traditional valve/tube design but with the ability to tailor the warmth or musicality via the DRIVE control. This shapes the overload curve to provide a user controlled blend of 2nd or 3rd harmonic distortion.
INPUTDRIVE
Ø | ON | LINE |
3RD | 2ND |
|
MIC | LINE | 0 |
| PAD | 48V |
|
+20 | +70 | +20 |
Both of these preamps use the same gain control providing +20dB to +70dB gain and share a passive front end with a switchable 22dB Input Pad and +48V phantom powering.
Please note that connecting a microphone to the XLogic E Signature Channel unit with phantom power switched on is not advised as it may cause damage to either the microphone or the input stage of the XLogic unit. Take care not to connect line level sources (keyboards etc.) to the microphone input with phantom power switched on as this may damage the output stage of the connected unit.
A Ø (Phase) switch is provide to reverse the phase of the selected channel input.
4.2Listen Mic Compressor
The SSL ‘Listen Mic’ Compressor was, throughout the 1980’s, the secret weapon in
LCOMP |
|
| many producers sonic arsenal of recording techniques. Originally designed to prevent |
|
|
| overloading the return feed from a studio communications mic, its fixed attack and |
|
|
| release curves were eminently suitable for use on ambient drums mics. The console |
|
|
| |
LESS | MORE |
| surgery required to gain access to the compressed output was performed on many |
|
| ||
|
|
| early E Series consoles before it became a standard modification on latter production |
|
|
| systems. The original circuit has been added into the XLogic E Signature Channel unit, |
IN |
|
| enhanced with the addition of a front panel threshold adjustment and a simple traffic |
|
| ||
|
|
| light indication of gain reduction. Due to the vagaries of the original design, the range |
|
|
| |
|
|
| of the threshold control is indicated as either LESS or MORE! The gain reduction |
|
|
| |
|
|
| indication takes the form of a |
|
|
| |
|
|
| |
|
|
| green to show that it is |
is applied. The circuit follows directly after the input stage allowing either microphone or line level signals to benefit from the sonic possibilities provided by this compressor.
Page 9