On some models:
The center of the Fill Indicator Cap will be clear when dispenser needs refilling.
On some models:
1.Press the flexible clear top of the Fill Indicator Cap to draw rinse agent into cap.
NOTE: You may need to press cap two or three times to remove all of the air bubbles from the cap.
2.When rinse agent does not show in cap, even after pressing flexible cap several times, dispenser needs refilling.
Center will be clear when empty, on some models
Press flexible clear top, on some models
To fill dispenser
You do not have to wait until the dispenser is empty to refill it, but do not overfill it. The dispenser will hold 6 ounces (175 mL) of rinse agent. Under normal conditions, this will last about 3 months.
1.Make sure the dishwasher door is fully open.
2.Remove the Fill Indicator Cap.
3.Add rinse agent to the dispenser. Do not fill past the smallest opening in the lower part of the dispenser.
If you overfill, excess rinse agent can come out. This will not harm the dish- washer, but could cause
4.Clean up any spilled rinse agent with a damp cloth.
5.Replace the Fill Indicator Cap and keep it tightly closed.
NOTE: Your dishwasher is designed to use a liquid rinse agent. You do not need to use a solid or
Keep rinse agent dispenser filled for best drying results
Do not fill past smallest opening
Quiet operating tips
To avoid thumping and clattering noises during operation:
l Make sure lightweight load items are secured in the racks.
l Make sure pot lids and handles, pizza pans, cookie sheets, etc. do not touch interior walls or interfere with the spray arm’s rotation or cover the spray tower.
l Load dishes so they do not touch one another.
NOTE: Keep sink drain plugs inserted during dishwasher operation to prevent noise transfer through drains.
13