3.Turn the Cycle Control knob clockwise to point to the desired cycle. Heavy Wash and Pots & Pans cycles share the same spot on the dial. The Cycle Selector button determines which cycle operates. You will feel a definite stop at each cycle mark. The dishwasher will automatically start the cycle you selected.
NOTE: If the door is latched, you will hear cycles start and stop as the knob passes each cycle mark. This is normal and will not hurt the dishwasher. If you prefer, you can set cycles with the door unlatched.
Starting your dishwasher using delay wash
You can set the dishwasher to start a cycle from 1 to 4 hours later.
1.Push desired Cycle Selector button.
2.Push desired Option Selector button(s).
3.Turn Cycle Control knob clockwise to the number of hours (from 1 to 4 hours) you want the dishwasher to delay before the selected cycle starts.
4.Close and latch the door. The DELAY/ WATER HEATING signal light will come on until the selected cycle starts.
NOTE:
l You can add items while time is counting down. Close and latch the door. The Cycle Control knob will not advance if the door is unlatched.
. Rinse & Hold and Light Wash cycles cannot be delayed.
l The DELAY/WATER HEATING signal light will also come on while the water is heating during all cycles.
The clean signal light
The CLEAN signal light will come on when a washing cycle is complete. To turn it off, turn the Cycle Control knob clockwise slightly until the light goes off.
7