Whirlpool DISHWASHERS manual When cycle is finished, Electrical connection, Converting to built-in

Page 21

When cycle is finished

1.Turn hot water off. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure.

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector.

4.Empty any remaining water from the connector by turning the connector upside-down.

5.Unplug power supply cord and return to

storage compartment.	Hose connection
6. Return hoses to storage compartment.

Electrical connection

A power supply of 120 votts, 60Hz AC, 15 or 20 amps, is required. For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a

3-prong grounding plug. To minimize possible shock hazard it must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Do not, under any circumstances, remove the power supply cord ground prong.

3.prong grounding

Power supply

cordI 3.prong grounding type wall receptacle

Converting to built-in

Your Whirlpool Portable Dishwasher can be
converted to a built-in (undercounter) model by
using conversion kit No. 4317856. The kit is
available at your Whirlpool dealer or authorized
WhirlpoolSM service company. Instructions are	21
included with the kit.	21

Image 21

Contents Series Dishwashers Thank you for buying a Whirlpool@ appliance Your safety is important to usDishwasher Help us help youPower Clean Parts And FeaturesControl panel ButtonsCycle control knob Before starting your dishwasher Using Your DishwasherStarting your dishwasher ThisClean signal light Starting your dishwasher using delay washCanceling a cycle Changing a cycle settingAdding a dish during a cycle Changing an optionCycle selection chart Hi-Temp Wash option What happens in each optionAir Dry option Using the detergent dispenserWhat type of detergent to use Detergent dispenserHow much detergent to use Using the rinse agent dispenserRinse agent dispenser To check dispenserTo fill dispenser Quiet operating tipsWater temperature tips To check water temperatureEnergy saving tips Special tips on dishwasher use Preparing to load the dishwasher Loading Your DishwasherLoading the top rack This SectionInfinite adjustable top rack Adjustable 3-position top rackMixed load Utensil loadDish load Loading the bottom rackTo remove the basket Loading the silverware basketTo replace the basket To open the basketConnecting a Portable Dishwasher Before startingWhile dishwasher is running When cycle is finished Electrical connectionConverting to built-in Cleaning the interior Cleaning the exteriorCaring For Your Dishwasher Caring for simulated wood topSolution chart Common Dishwashing ProblemsInsufficient fill caused by low water pressure Removing spots and film Before calling for assistance If You Need Assistance Or ServiceIf you are not satisfied with how the problem was solved If you need serviceIf you need assistance If you need FSP@ replace- ment partsPower Cleantm washing system parts covered by your warranty Whirlpool Dishwasher Warranty