When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds [to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or during the cycle
. Touch COOK POWER.
l Touch a number for the new Cook Power.
l Touch START.The cycle will cook at the new Cook Power for the original time. OR...
l Touch COOK POWER twice if you want to change a lower Cook Power to HIGH.
. Touch START
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes at HIGH Cook Power can be
selected by touching TIME and the corresponding Number Pad
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use TIME to cook various food items without having to look up the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just the TIME Pad. The time may be changed to any time from
allowing you to store your favorite cooking time and Cook Power, or to
DO THIS... | THIS HAPPENS... |
1.Put food In the oven and close the door.
2.Touch TIME.
(Optlon: Sklp to Step 6 if you want to use the pre- set cooking tlme and Cook Power.]
The AUTO SETIndicator Light will come on and the Display will show 2 minutes, 30 seconds (or the time you have set as your favorite cycle).
continued on next page