Whirlpool MH7lOOXY manual Changing the Pre-programmed Setting, Auto Set Temp

Page 13

Changing the Pre-programmed Setting

You can change the pre-programmed power you most often use. To change

1. Touch Auto Set TIME twice.

cooking time and Cook Power in Auto Set TIME to the time and the Auto Set TIME setting, follow these steps:

2.Touch the Number Pads forthe new desired cooking time. If HIGH Cook Power is desired, skip to Step 5.

3.Touch COOK POWER.

4.Touch the Number Pad for the desired Cook Power.

5.Touch START.The oven will start. If food is not to be cooked at this time, touch CANCEL. The new time and Cook Power will be stored in memory for future use. NOTE: If electric power ever goes off, the

oven will go back fo fhe pre-programmed 2 minutes, 30 seconds at HIGH Cook Power setting.

Auto Set TEMP

Auto Set TEMP provides ten preset probe temperatures (see “Cooking with the Tempera- ture Probe” on page 19). One-hundred ten (110) to one-hundred ninety (190) degrees

at 70% Cook Power can be set by touching TEMP and the corresponding Number Pad (l-9). You do not need to touch any additional Number Pads as you do when using COOK 1 or COOK 2. This provides a short-cut method for setting commonly used probe temperatures.

The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use TEMP to cook various food items without having to look up the temperatures.

A preset temperature of 165°F at HIGH Cook Power is available (after inserting the probe]

by touching just the TEMP Pad. This temperature may be changed to any temperature from 9O’F to 200°F allowing you to store your favorite cooking temperature and Cook Power, or to pre-program the oven for someone else to cook an already prepared dish at a later time. See page 14 for instructions.

DO THIS...

THIS HAPPENS...

1.Put food in the oven and close the door.

3.Touch a Number Pad for

the new temperature yet u want fra Irn 110°F to 190°F.

The AUTO SETand PROBE TEMP Indica- tor Lights will come on and the Display will show 165°F (or the temperature you have set as your favorite cycle).

The Display will show what you touched in degrees Fahrenheit. This example shows 140°F.

To select a Cook Power other than 70%. touch COOK POWER.

The COOK POWER Indicator Light will come on and the Display will show “P-70:’This shows the oven is pre-

programmed to cook at 70% power.

continued

on next page

,?

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model MH7lOOXY Contents Before you install your microwave oven Important Safety Instructions Command Pads Display/Clock Indicator LightsMicrowave oven controls Setting the Clock Audible SignalsNumber Pads Fan and light PadsThis This Happens Minute TimerChanging the Minute Timer Cancelling the Minute Timer Cooking at High Cook PowerCooking in Your Microwave Oven COUd dQWfl Cooking at Lower Cook PowersChanging the Cooking Time EW-lk Dawl-l NnnChanging the Cook Power Using Auto SETAuto Set Time Page Auto Set Temp Changing the Pre-programmed SettingTor Lights Additional Information DefrostingAbout the Quick Defrost Cycle Standing Time and Cooking Automatically After DefrostingChanging or Adding Defrost Time Cooking with More Than One Cycle at One or More Cook Powers DOwn DClWllCooking with the Temperature Probe This Happens Hints for Using the Temperafure Probe DO...DON’T Changing TemperatureRemoving and cleaning the Temperature Probe Probe Cooking TipsUsing Pause with Quick Defrost Using PauseAdding Pause Between Cycles Using Keep WarmTo Automatically Follow Another Cycle Using Auto Start Page Other Operating Hints Smoke Deflector Accessory KitCleaning the Rack Cleaning the Microwave OvenBi-Level Cooking Rack Inserting the RackCaring for the Filters Oven Light Cook-top lightOperating safety precautions Mode Mixercover Before calling for assistance General informationIf you need service Page Page Warranty
Top Page Image Contents